Hyundai India second plant in Tamil Nadu

AddThis Feed Button

March 11th, 2006 Leave a comment Visited 4365 times, 9 so far today





Hyundai India second plant in Tamil Nadu

South Korean automaker Hyundai has announced that they would be basing the second manufacturing unit in India in the state of Tamil Nadu. The company also said in a statement that the company would soon make India their global hub of small cars.

Hyundai’s southern region Senior General Manager, Young Jin Ahn was opening a new showroom when he said that India was seeing a revolution in the auto industry with purchasing power of the consumer increasing significantly.

He also added that Hyundai India’s second plant at Sriperumbudur near Chennai would produce three lakh units per annum and by the end of 2007, the total production would reach six lakhs per annum. He even referred to Chennai as ‘Detroit of East’ considering the city houses many auto giants.

Hyundai India is also nearing shipping their one-millionth car in the Indian market.



Subscribe to updates on Email:




TechWhack on Facebook

This website uses IntenseDebate comments, but they are not currently loaded because either your browser doesn't support JavaScript, or they didn't load fast enough.

276 Comments

  1. #
    S.Vinoth Kumar
    March 19th, 2006 at 9:25 pm

    Kindly send me the recruitment email ID pl.

    Reply to this comment
  2. #
    Rekha
    April 4th, 2006 at 5:12 pm

    Dear Sir,

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  3. #
    SWAMINATHAN
    April 5th, 2006 at 3:48 pm

    Respected sir,
    Requesting for the e-mail id of hyundai motors to contact and send the soft copy of resume for recruitment
    with regards
    SWAMINATHAN

    Reply to this comment
  4. #
    B.VIGNESH KUMAR
    April 7th, 2006 at 5:05 pm

    sir/madam

    please open oppurtunity column or careers column.

    this is useful for freshengineer like me…and it is also

    use ful for your company because you can pickup easily

    from the graduates.

    by

    B.VIGNESH KUMAR B.E(I.C.E)
    2G-P14/1 TNEB quarters,
    PERIYAR PROJECT,
    LOWERCAMP-625525
    THENI - DIST

    Reply to this comment
  5. #
    razin
    April 18th, 2006 at 10:42 pm

    Sir please send me the address (postal or web) of the hyundai company in chennai so that I can apply for the suitable job.
    thank you

    Reply to this comment
  6. #
    DINESH .P
    April 21st, 2006 at 6:06 pm

    I AM STUDING IYEAR MBA ,IN DINDUGAL

    Reply to this comment
  7. #
    Bunny
    April 25th, 2006 at 10:08 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    If you have any vacancies currently pl. send me the mail ID to which i want to mail my resume.

    Reply to this comment
  8. #
    Anitha Chandran
    April 28th, 2006 at 1:08 pm

    Dear Sir,

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  9. #
    C.VENUGOPALAN B.E.,
    April 30th, 2006 at 9:16 pm

    Dear Sir
    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai
    If you have any vacancies currently please send me the mail ID to which i would like to mail my resume for your process and reference.
    Thaking you
    With regard
    C.Venugopalan B.E

    Reply to this comment
  10. #
    R.Siva vignesh
    May 1st, 2006 at 2:33 pm

    Respected sir,
    KINDLY SEND THE MAIL ID REGADING RECRUITMENTOF FORD,BMW,HYUNDAI,NOKIA
    THANKING YOU

    Reply to this comment
  11. #
    satheeshkumar
    May 3rd, 2006 at 8:15 pm

    sir,

    i just want to know about the vaccancies for toolmakers in your esteem organisation ,and i am good enough in sheet metal processing,vendor development,part production control , new product developement etc..
    regards

    satheesh kumar

    Reply to this comment
  12. #
    S.Ashok kumar
    May 5th, 2006 at 7:18 pm

    I had completed my DME at 78% if any requirment please sent me mail or postal
    Address:
    S.ASHOK KUMAR
    2/116 SANTHAI MEDU STREET,
    SINGAPERUMAL KOIL
    KANCHEEPURAM DIST
    PINCODE-603204
    PHONENO.044-27463150

    Reply to this comment
  13. #
    jecinthapaulson
    May 11th, 2006 at 5:28 pm

    i want job in chennai based companies like nokia,hyundai,ford, etc..and i finished my advanced diploma in computer applications.
    pls disturb me in
    jecinthapaulson
    5/149 panneer selvam st,
    m.a.nagar
    redhills,
    chennai-600052.
    jecinthakp@hotmail.com
    9840679759

    Reply to this comment
  14. #
    N.Karthikeyan
    May 14th, 2006 at 10:22 am

    I want job in chennai based MNC companies like hyundai, ford etc., and I have the B.Sc., PGDCA degree course and presently doing the MBA degree course. Otherwise I have 10 yrs experience in administration field.

    my address is

    N.Karthikeyan
    C/o. K.Ganesan
    5/35, 10 th st, Kandasamy Ngr Extn. Poonamallee. Ch - 56

    Reply to this comment
  15. #
    srinivastripurneni
    May 16th, 2006 at 12:10 pm

    dear sir/madam,
    i just want to know the vaccancies for the toolmakers with cad design experience.

    Reply to this comment
  16. #
    srinivas
    May 16th, 2006 at 12:15 pm

    dear sir/madam,
    I just want to know the oppurtunities for Toolmakers with cad design experience.i worked for Nissan motors(Japan),Ford motors(UK).

    My address,
    doorno : 2-29,
    mudinepalli,
    Mobile :09449617659.

    Reply to this comment
  17. #
    HARIRAJ
    May 18th, 2006 at 2:34 pm

    i want job in chennai based companies like nokia,hyundai,ford, etc..and i finished my advanced diploma in cAMICAL applications.

    Reply to this comment
  18. #
    k.velraja
    May 20th, 2006 at 2:10 pm

    please send the e-mail address of hyundai motor company in chennai to my e-mail id

    Reply to this comment
  19. #
    k.velraja
    May 20th, 2006 at 2:13 pm

    please send the e-mail id to my address

    Reply to this comment
  20. #
    M.G.Manikandan
    May 24th, 2006 at 11:34 am

    sir/madam,

    i want a good job in chennai in any feild and i know that i can prove my self in what i am in. i want a good experiance in what i am working. my mobile number is 9884475740. and plz contact me and show me the way to begin my life.

    Reply to this comment
  21. #
    P.Selvan
    June 24th, 2006 at 5:31 pm

    My address,
    27,Bajanai kovil street,
    Thondamuthur(post),
    Coimbatore-641109.
    Phone no:0422618017.
    Thanking you,
    To
    Hyundai motor india Ltd,
    Qualification:Diploma in Mechanical Engineering,April2003,
    First class with Honours.

    Reply to this comment
  22. #
    marimuthu
    June 25th, 2006 at 10:48 am

    i am so interested to work in automobile company.so send mail id.

    Reply to this comment
  23. #
    Prem
    July 5th, 2006 at 7:18 pm

    Dear Sir,

    Kindly send me the mail ID’s of MNC’s like Ford,Hyundai,BMW,L&T,Nokia regarding the Recruitment for my mail ID’s Pre_Sru@Yahoo.com,Presru@rediff.com,Presru@sify.com, orelse mail to my adress,218,kunnathur,S.S.kulam(via),Coimbatore-641107

    Reply to this comment
  24. #
    sanil
    July 17th, 2006 at 6:20 pm

    sir , i completed diploma in tool and die making from nttf,tellicherry center
    i would like to kno about the vacncies for the same post in ur company
    kindly provide me ur mail id
    my contact no: is 09449744463
    regards
    sanil

    Reply to this comment
  25. #
    mohammed buhari
    July 18th, 2006 at 11:38 pm

    sir,
    now i am doing my final year mechanical engineering near to hyundai i need a job in hyundai ,pls send me the detail about job oppertunity

    Reply to this comment
  26. #
    B.RENGARAJ
    July 28th, 2006 at 4:58 pm

    sir, i have finished my dme.i want to join your company for any dme vaccancy.please give one chance for me
    thank you!

    Reply to this comment
  27. #
    rajani kanta munda
    July 31st, 2006 at 3:31 pm

    sir
    i am mechanical final year student.please send me detail about job oppertunities in any automobile industry.

    Reply to this comment
  28. #
    rengaraj.b
    August 1st, 2006 at 5:22 pm

    please give a chance for me in any vaccant.i have finished my diplomo in mechanical engineering.
    thank you!

    Reply to this comment
  29. #
    rengaraj.b
    August 1st, 2006 at 5:25 pm

    i have good percentage of marks &good communication and presentation skills

    Reply to this comment
  30. #
    sathish.s
    August 6th, 2006 at 10:14 am

    sir
    kindly send me mail in , i have experianced for one year in a leading manufacturing company

    Reply to this comment
  31. #
    SAM J.G.NICHOLSON
    August 7th, 2006 at 2:26 pm

    Dear sir,

    kindly send me e-mail ID for recruitment and detail vaccancies in HMIL chennai plant.

    regards,

    samnicholson.

    Reply to this comment
  32. #
    Rashmikant
    August 7th, 2006 at 11:09 pm

    Dear Sir,
    I am Automobile Engineer with MBA from Symboisis University (Experience 7 years) & searching for job if u have pls mail or contact me 09898379498/e mail id:prajapati_rashmikant@yahoo.co.in.

    Reply to this comment
  33. #
    Rashmikant
    August 7th, 2006 at 11:13 pm

    Dear sir,
    Pls send me the detail or vaccancy from any of the automobile company like Hyundai,Ford,Tata,Maruti,Toyota,BMW etc..
    Pls contact me on my mobile no.+919898379498 or send me inquiry on my mail id prajapati_rashmikant@yahoo.co.in

    Reply to this comment
  34. #
    V.Ganapathi
    September 1st, 2006 at 8:14 pm

    Dear Sir/Madam,
    pls send the E-mail ID of Hyundai motors which is going to start new plant at sriprematur.i have completed my B.E(mech)from Anna Univ.with distnction 76%(Passout 2006).Iam ready to work with any kind of challenging jobs and i assure that i will satisfy their needs through my exellence.my mb.no9994762922
    with Truly,
    V.Ganapathi.

    Reply to this comment
  35. #
    shijin j.
    September 26th, 2006 at 10:53 pm

    Dear sir,
    please inform me if there is any vacancies for tool and die maker. my address is
    Chaithram,
    Near providence home
    Malampuzha ,
    Palakkad,
    KERALA

    Reply to this comment
  36. #
    N Suresh
    September 29th, 2006 at 11:35 am

    Sir please send me the address (postal or web) of the hyundai company in chennai so that I can apply for the suitable job.
    thank you

    Reply to this comment
  37. #
    G.Udhayakumar
    October 2nd, 2006 at 10:07 am

    Respected Sir,

    I have completed my B.E(Mechanical) in june 2006 with an aggregate of 73%. Kindly send me the email address of ur company so that i can apply for the job. My email address is sent along with this comment for ur reference.

    Reply to this comment
  38. #
    vipindas.m
    October 2nd, 2006 at 1:00 pm

    sir,
    i completed diploma in tool& die making from NTTF.If any vacancy over there means please send your mail id to my email

    Reply to this comment
  39. #
    ARULMURUGAN.A
    October 10th, 2006 at 7:45 am

    Dear Sir,

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    arulmurugana@gmail.com

    Reply to this comment
  40. #
    ARULMURUGAN.A
    October 10th, 2006 at 7:46 am

    Dear Sir,

    I have completed chemical engineering with 81% aggregate. Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    arulmurugana@gmail.com

    Reply to this comment
  41. #
    dharmarajan
    October 11th, 2006 at 6:58 pm

    plese give hyndai e mail id

    Reply to this comment
  42. #
    R.CHAKRAVARTHY
    October 19th, 2006 at 3:27 pm

    pls send the E-mail ID of Hyundai motors which is going to start new plant at sriprematur. Till I am working in Gulfar Engg. Contracting LLC with 8+ year Experience pls contact me in my mobile no. 99411 26857 & 04146 293448

    Reply to this comment
  43. #
    praveenkumar t k
    October 22nd, 2006 at 11:18 pm

    dear sir
    i completed my certificate course in tool and die making from NTTF and got working exposure for one year.now i am doing finalyear BE(MECHANICAL).Pls send me the e-mail id and inform me when the opportunity comes.

    Reply to this comment
  44. #
    rajesh. m
    January 20th, 2007 at 9:23 am

    Dear Sir,
    I Completed My Diploma In Mechanical Engineering in april 2003.kindly send me the mail regarding requirements in Hyundai Motor India Ltd.

    Reply to this comment
  45. #
    selvamuthu
    February 14th, 2007 at 12:16 am

    ihave completed diploma mechanical engineering in april 2000 with 84%.Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    If you have any vacancies nokia,ford currently pl. send me the mail ID to which i want to mail selvamuthucreative@yahoo.co.in

    Reply to this comment
  46. #
    palanivel.m
    February 14th, 2007 at 3:00 pm

    Dear Sir,
    I have finished on DME(91%)2005 batch and now, my traning doing for ISRO-VSSC for AUTOCAD field(1 year based training),i want job same field in chennai based companies. i finished my CNC-EDM wirecutting course on UMS kovai.
    thank you,

    Reply to this comment
  47. #
    S.NAVEENI SESHA
    March 11th, 2007 at 1:14 pm

    hi
    sir/madam
    as im s.naveeni sesha, persuing in B.COM @ B’LORE UNIVERSITY, THIS MY LAST SEMSTER,IM READY TO WORK BUT IM MUCH INTERESTED IN CHENNAI BRANCH,SEND ME THE MAIL IF ANY REQUIRMENTS IN HYUNDAI COMPANY ,I HAVE GOOD PERCENTAGE ALSO.

    Reply to this comment
  48. #
    v.maheswaran
    March 11th, 2007 at 5:29 pm

    sir
    I Want job in chennai

    Reply to this comment
  49. #
    D.LOGESH
    March 11th, 2007 at 7:43 pm

    DEAR SIR
    IAM LOGESH FROM CHENNAI. I HAVE TWO YEARS EXP.I FINISHED DIPLOMA IN MECHANICAL ENGG in chennai petroleum corportation limited, chennai and PG dipolma in power plant operation and maintenance in university of petroleum energy studies in - dheradun,uttranchal.IF ANY JOB PLZ INFORM TO ME

    THANH YOU

    WITH REGARDS

    LOGESH

    Reply to this comment
  50. #
    Mugunth
    March 27th, 2007 at 11:04 pm

    respected sir,
    i am presently working in a chemical company situated in chennai , i am a 2006 passed out B.E in mechanical engineering, i am keen in working in any of the automobile manufacturing industries kindly inform me if there are any vacancies.

    Reply to this comment
  51. #
    m.shankaran
    March 31st, 2007 at 8:25 pm

    dear sir,

    I have finished on DAE 2006 batch and now,im doing for AUTOCAD MCAD and also CATIA V5,i want job same field in chennai based companies,like the bmw, hyundai, ford etc.
    thank you,
    m.shankaran, coimbatore, tamil nadu

    Reply to this comment
  52. #
    K. SUREKA
    April 5th, 2007 at 2:11 pm

    Dear Sir,

    Kindly send me the mail ID regarding recruitment in Autocad at Hyundai Motor India Ltd., Chennai

    Thanking you,

    SUREKA

    Reply to this comment
  53. #
    ajit kumar
    April 14th, 2007 at 11:58 am

    sir i m doin b.tech from aaidu(allahabad)in branch ece
    6th sem.i want to have job in south india.kinly send me job that best suited me

    Reply to this comment
  54. #
    bhavesh gandhi
    April 18th, 2007 at 11:50 pm

    dear sir,
    i am in a need of hyundai getz crdi.when would it be be launched in india.

    Reply to this comment
  55. #
    sandeep.p
    April 25th, 2007 at 8:47 pm

    Respected Sir/ Madam,
    Im a graduate in Mechanical engineering, residing now in Chennai… Im very interested to start my career life from hyundaI… Please inform me if there is any requirement in your esteemed firm..

    Reply to this comment
  56. #
    M.HARIHARAN
    April 29th, 2007 at 10:18 pm

    Dear sir,
    I am B.E Mechanical & Production engineer. I am working since Nov2005 in Dubai Lucy Switchgear-U.K based-ISO certified company, as Quality assurance engineer.likely to be settled in india before end of this year.Now i am seeking for jobs in india in similar industry or any manufacturing industries like ford, hyundai, nokia, caterpillar etc.
    Regards,
    M.Hariharan.

    Reply to this comment
  57. #
    kandasamysaravanan
    April 30th, 2007 at 7:51 am

    Now i am working in singapore.but i like to do work in india.so pls send the E-mail ID Pls send me the detail or vaccancy from any of the automobile company like Hyundai,Ford,Tata,Maruti,Toyota,BMW, Hyundai motors which is going to start new plant at sriprematur.i have completed my D.M.E(mech)with distnction 86.5%(Passout 2001).Iam ready to work with any kind of challenging jobs and i assure that i will satisfy their needs through my exellence.my mb.no (65) 91898293
    with Truly,

    Reply to this comment
  58. #
    ADALARASU.S
    May 1st, 2007 at 6:13 pm

    sir,
    kindly send me the email id which recruiting jobs in hyundai
    i am a DIPLOMA holder from Nettur Technical training Foundation, Vellore, Tamil Nadu, India.

    I had experience of more than 3 years in Tool manufacturing, maintenance and design.

    Presently i am working in Chennai

    Regards,
    Adalarasu.S

    Reply to this comment
  59. #
    mohan
    May 23rd, 2007 at 1:05 pm

    sir,
    kindly send me the email id for recruiting jobs in hyundai, kindly send me e-mail ID for recruitment and detail vaccancies in HMIL chennai plant.plese give hyundai e mail id

    Reply to this comment
  60. #
    Sijimon James
    May 31st, 2007 at 8:13 pm

    Dear Sir,

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  61. #
    sathish
    June 5th, 2007 at 8:31 pm

    I am getting mark in D.M.E 85% send job infirmation .i am fresh canditate

    address
    C.SATHISHKUMAR,
    S/OV.CHANDRA SEKAR,
    2\94,KAMARAJAR SY.,
    KATTUR,
    TRICHY-920019
    TAMILNADU

    Reply to this comment
  62. #
    jerin
    June 13th, 2007 at 8:32 am

    hi guys and girls this is to inform you all that there is a walk-in interview in Hyundai motors india ltd,chennai.but all u have to need is a person whom u know working inside the company.if you know that u can enter the Tests kept by the company directly..

    Reply to this comment
  63. #
    sivashanmugam
    July 2nd, 2007 at 4:25 pm

    Dear sir,
    I have completed diploma in Electrical & Electronics engineering in april 2003 with Honours 92%.Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai new plant at sriprematur. Till I am working in GE india pvt ltd, as a consultant with 4+ year Experience in industrys pls contact me in my
    Mobile number 9986484493.
    E-mail ID: sivashanmugam.s@gmail.com
    Could you please informe me any requirment is there in Hyundai motor india ltd.

    Thanks&Regards,
    S.sivashanmugam.

    Reply to this comment
  64. #
    k.arulmurugan
    July 8th, 2007 at 11:21 am

    dear sir,
    I have complete diploma in mech.in the year of 2001.I have an experience in the field of machinery main. in textile unit(spinning OE Division)for 5 years.please inform me any suitable job .
    Thanking you.

    Reply to this comment
  65. #
    Sankar
    July 17th, 2007 at 8:12 pm

    Kindly send me the mail ID regarding recruitment at Nokia and Motorola, Chennai

    If you have any vacancies currently pl. send me the mail ID to which i want to mail my resume.

    Reply to this comment
  66. #
    prabhakar thalapathi
    July 23rd, 2007 at 7:47 am

    hello sir
    i have completed my mechanical engineering with a CGPA of 8.30. if you have any vacancies kindly send me your email id so that i can contact you,
    thank u sir in advance

    Reply to this comment
  67. #
    Ajaykumar.M
    August 2nd, 2007 at 5:05 pm

    sir,

    I have 15 years experience as office Assistant and knowing all office rouinte work.Pls let me know any suitable postfor me.

    regards,

    ajay
    mobile:09825210871

    Reply to this comment
  68. #
    r.senthilkumar
    August 4th, 2007 at 7:57 pm

    i’m very eagar to work in hmil,chennai.i’ve no idea about the hr depatment’s e-mail id.please furnish the id.
    thank you,
    r.senthil kumar
    namakkal

    Reply to this comment
  69. #
    Aravind p
    August 4th, 2007 at 10:44 pm

    Respected sir,
    I am a fresh mechanical engineering graduvate.i am from kerala,i want to join this company as an engineer because i know that this company is the most powerful & leading company in the world and their is another reson behind that ,that is if i join this company then i become an very innovative person there is no doubt.so please join me as engineer in your company.I hope you will defenitly response to this my message.

    Reply to this comment
  70. #
    Aravind p
    August 4th, 2007 at 10:49 pm

    Respected sir,
    I am a fresh mechanical engineering graduvate.i am from kerala,i want to join this company as an engineer because i know that this company is the most powerful & leading company in the world and their is another reson behind that ,that is if i join this company then i become an very innovative person there is no doubt.so please join me as engineer in your company.I hope you will defenitly response to this my message.

    my Email ID: aravind_roxy@yahoo.co.in
    Phone no: 9895265067

    Reply to this comment
  71. #
    Aravind p
    August 4th, 2007 at 10:55 pm

    Respected sir,
    my name is aravind.p,I am a fresh mechanical engineering graduvate.I am from kerala,i would like to join this company as an engineer because i know that this company is the most powerful & leading company in the world and their is another reson behind that ,that is if i join this company then i will be a very creative & innovative person and this will help me in future there is no doubt.so please join me as engineer in your company.I hope you will defenitly response to this my message.
    my Email ID: aravind_roxy@yahoo.co.in

    Reply to this comment
  72. #
    sathish kumar.r
    August 21st, 2007 at 2:21 pm

    DEAR SIR/MADAM,
    I am Sathish Kumar.R with DME. I have 1 year experience in “TATA CONCORDE MOTORS INDIA LIMITED”as a team leader in service field.Then i have 6 months experience in “DELPHI TVS” as a CNC Operator in production field.With my quest to learn and my ability to put in to use my knowledge, I believe, I will be able to make a significant contribution to greater future of the company.

    THANKING YOU

    YOURS TRULY
    R.SATHISH KUMAR

    Reply to this comment
  73. #
    kumaresh
    August 21st, 2007 at 8:18 pm

    i am a fresher looking good job. completed my mechanical engg

    Reply to this comment
  74. #
    jeyabalaji.R
    September 3rd, 2007 at 5:22 pm

    sir i am a diploma holder in automobile engg with 2 years experience and i like to have a challenging position in your company which will be helpful to improve my tecnical knowledge and to share my ideas.please send a mail while the time of recruitement.

    Reply to this comment
  75. #
    jeyabalaji.R
    September 3rd, 2007 at 5:25 pm

    sir i am a diploma holder in automobile engg with 2 years experience and i like to have a challenging position in your company which will be helpful to improve my tecnical knowledge and to share my ideas.please send a mail while the time of recruitement in hyundai india pvt ltd.

    Reply to this comment
  76. #
    r.srinivasan
    September 5th, 2007 at 10:40 pm

    sir, iam working in tool room job in tool room section iam working in 20 years in various country in that singapore, malasiya, now working in thaliand , iam indian my native in chennai near your place any sutible job have informe me any time i will join your companey

    Reply to this comment
  77. #
    RADHAKRISHNAN
    September 12th, 2007 at 3:33 pm

    dear sir

    lovely goood evening sir\madam plz send the recuritment date in your firm.am did my MBA in Anna university

    Reply to this comment
  78. #
    I.JOSEPH
    September 18th, 2007 at 10:05 am

    Sir, send me E-mail ID of HYUNDAI to apply for the job. THANKING YOU.

    Reply to this comment
  79. #
    S.Anand Kumar
    September 29th, 2007 at 7:13 pm

    Hello Sir I am a BCA graduate seeking for a JOB in Hyundai,Also am doing MCA through distance Education , i have experiance in BPO(voice -Based call center)more than 1-year.please Kindly send a mail while the time of recruitement.

    Reply to this comment
  80. #
    janarhanan e m
    October 4th, 2007 at 11:50 pm

    sir,
    i completed diploma in tool& die making from NTTF.If any vacancy over there means please send your mail id to my email

    Reply to this comment
  81. #
    TKPadmanabhan
    October 5th, 2007 at 4:53 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  82. #
    S.Karthikeyan
    October 18th, 2007 at 11:18 am

    Dear Sir,
    Kindly send me the recruitment email ID for any R&D jobs in engines.I am working as trainee engineer in R&D engines department (govt company).

    Reply to this comment
  83. #
    SWAMIDOSS STALIN
    October 27th, 2007 at 2:44 pm

    I am an ex employee of spic having 25 years of experience in the rotating equipment maintenance as a maintenance engineer
    In the year 2004 I have resigned from spic and joined in a chemical plant at kuwait
    I am seeking employment at chennai to settle down with my family
    My Basic qualification is DME completed in the year 1982 and BS in Engineering an Off campus course conducted by BITS Pilany in the year 1999
    If suitable opportunity is available with Hyundai kindly convey through e mail
    Thank you-stalin

    Reply to this comment
  84. #
    ANAND.P
    November 11th, 2007 at 10:17 pm

    sir,i completed diploma in mechanical @ apr 2007.If any vacancy over there means please send your mail id to my email

    Reply to this comment
  85. #
    ANAND.P
    November 11th, 2007 at 10:18 pm

    sir,

    i completed diploma in mechanical at april 2004.If any vacancy over there means please send your mail id to my email

    Reply to this comment
  86. #
    ANAND.P
    November 11th, 2007 at 10:25 pm

    Dear sir,
    I have completed diploma in mechanical engineering in april 2007 with Honours 90%.Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai new plant at sriprematur. Till I am working in corborundum universal ltd as team membert with 5 months Experience in industrys pls contact me in my
    Mobile number 9380232338
    E-mail ID: anand_mechtpt@yahoo.co.in
    Could you please informe me any requirment is there in Hyundai motor india ltd.

    Thanks&Regards,
    p.anand

    Reply to this comment
  87. #
    DHANALAKSHMI.R
    November 19th, 2007 at 10:08 pm

    Respected sir/mam,
    Requesting for the e-mail id of hyundai motors to contact and send the soft copy of resume for recruitment
    with regards
    DHANALAKSHMI
    E-mail ID: bav_gd@yahoo.co.in

    Reply to this comment
  88. #
    ritesh
    November 20th, 2007 at 2:23 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    If you have any vacancies currently pl. send me the mail ID to which i want to mail my resume.

    Reply to this comment
  89. #
    M.Senthil Kumar
    November 20th, 2007 at 5:43 pm

    Dear Sir/Madam,

    I am diploma in Mechanical engg @April 2003. If any vacancy over there means please send your mail id to my email

    Reply to this comment
  90. #
    M.Senthil Kumar
    November 20th, 2007 at 5:46 pm

    I am diploma in Mechanical engg @April 2003. If any vacancy over there means please send your mail id to my email senthilkumarmanoharan@yahoo.com

    Reply to this comment
  91. #
    balaji
    November 21st, 2007 at 10:36 am

    plz send me recruitment the mail id for electronics engg .. i am 2006 passed out BE(ECE) …..

    Reply to this comment
  92. #
    GOPALAKRISHNAN.S
    November 21st, 2007 at 3:08 pm

    RESPECTED SIR,
    I AM FINISH MY B.E MECHANICAL ENGINEERING IN 2007 IN TRICHY ENGG COLLEGE TRICHY.pls give requirement details in hyundai. still working piping pressure parts design.

    Reply to this comment
  93. #
    GOPALAKRISHNAN.S
    November 21st, 2007 at 3:09 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    If you have any vacancies currently pl. send me the mail ID to which i want to mail my resume.

    Reply to this comment
  94. #
    S.GOPALAKRISHNAN,B.E{MECH}
    November 21st, 2007 at 3:13 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai
    If you have any vacancies currently please send me the mail ID to which i would like to mail my resume for your process and reference.
    Thaking you
    With regard
    S.GOPALAKRISHNAN,B.E

    Reply to this comment
  95. #
    Shivendra Pratap Singh
    November 22nd, 2007 at 10:13 pm

    Respected sir,

    I am Shivendra Pratap Singh
    Mechanical Engg.(2006)
    Post diploma in tool design & Manufracturing from CTTC Bhubaneswar(2007).

    Explore in Pro-E, Catia V5, AutoCAD 04,06, UG Nx3

    Currently working as a instructor in CADD Center Greter Noida UP.Till date 22 nov. 07

    Hope i am the Suitable person in your Design & R&d Section.

    Reply to this comment
  96. #
    SAMPATH KUMAR.K
    November 23rd, 2007 at 2:37 am

    i am 6years experience in automative field in quality department.
    if you have any vacancies
    kindly send the mail id

    Reply to this comment
  97. #
    SAMPATH KUMAR.K
    November 23rd, 2007 at 2:43 am

    I am 6years experience in automative field in quality department
    If you have vacancies in hyndai car company
    kindly sent the mail id
    mail id :- sub_sampath@yahoo.co.in
    Phone no.:- 0422-6545943

    Reply to this comment
  98. #
    Pardeep Kumar
    November 23rd, 2007 at 9:43 am

    Respected sir,

    I am Pardeep Kumar
    Diploma in Mechanical Engg.(2005)
    Post diploma in CAD/CAM from CTR ludhiana (2006).

    Explore in Pro-E, Catia V5, AutoCAD 04,06,DelCAM, SolidWorks

    Working Ex: 2 year approx
    in CAD/CAM Field

    Currently working as a instructor in CADD Center Greter Noida UP.Till date 23 nov. 07

    Hope i am the Suitable person in your Design & R&d Section.

    Mail ID pardeep1433@gmail.com
    Contact no. 09891067449

    Reply to this comment
  99. #
    vijayakumar
    November 23rd, 2007 at 12:09 pm

    Respected sir;
    I am vijayakumar from tamilnadu.I completed my engineering in 2006 with good marks(77%).currently i done my CCNA course in accel.

    I got valid GATE score in the year of 2006. Exams conducted bt IIT.

    I have full knowlege in my subjects.

    I am intrested to join in hyundai motors,.
    How to apply to your company sir?

    Reply to this comment
  100. #
    vijayakumar
    November 23rd, 2007 at 12:13 pm

    respected sir
    I am intreasted to join your ompany.Please give me your company emil to send my resume

    Reply to this comment
  101. #
    RAVIKUMAR
    November 24th, 2007 at 6:16 pm

    Dear sir,
    iam a diploma holder in mech engg. iam working as a design engg at reputed industry. i want to apply the
    resume to hyundai please send Email address.

    Reply to this comment
  102. #
    vijayakumar
    November 26th, 2007 at 11:11 am

    Respected sir;
    Two days before i send a mail .there is no response from your side .please give me response. I am intreasted to work in your industry.

    Reply to this comment
  103. #
    RITESH
    November 30th, 2007 at 3:30 am

    Dear sir,
    i am diploma holder (tool and die making) currently undergoing one year industrial training programme thish is my final year.i’m second topper of my institute.
    I am interested to join your company.Please send me your company Email address to send my resume.

    Reply to this comment
  104. #
    NIshith Nigam
    December 1st, 2007 at 9:20 pm

    Kindly send me the email id or contact number of he HR Team of Hyundai , regarding the job openings and also o send CV at their end.

    Reply to this comment
  105. #
    R.R.SAKTHIVEL
    December 8th, 2007 at 5:53 pm

    Hello,
    I introduce myself R.R.Sakthivel working as an Prototype and Tesing Sr.Executive in an MNC company at Hosur. Let me know whether an vaccancies related to my profile.

    Thanks & Regards,
    Sakthi.

    Reply to this comment
  106. #
    D.Manoj Kumar
    December 12th, 2007 at 11:39 am

    Sir this is Manoj from chennai,Working as a Sales Representative for 7 years in Popular Scooters Pvt Ltd( TVS Motor & company), Chennai.

    I want to know about the job vacancies in sales side, If you find any vacancy means pls inform.

    Thanks & Regards,
    D.Manoj kumar.(9940696999)

    Reply to this comment
  107. #
    M.Hariharan
    December 13th, 2007 at 11:49 am

    Dear Sir,
    I have completed my D.M.E in 1st class with honors.
    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai
    If you have any vacancies currently please send me the mail ID to which i would like to mail my resume for your process and reference.
    Thaking you With regards

    M.Hariharan
    (09994166574)

    Reply to this comment
  108. #
    Sujit.V.George
    December 16th, 2007 at 7:52 pm

    Sir/Madam,
    I am a fresh mechanical engineer having the knowledge of design softwares like Pro-E, Autocad, Ansys, Solidedgeand Catia. I’m looking forward to have a promising position in your company where I can put my conceptual ideas into maximum practical purpose. So I request you to kindly send me an email id so that I can send my resume and apply and attend for the recruitment process in your firm.
    Regards,
    Sujit.V.George

    Reply to this comment
  109. #
    Prasath.B
    December 18th, 2007 at 8:36 am

    plz give reply to my mail ID

    Reply to this comment
  110. #
    Rohan R
    December 18th, 2007 at 8:56 pm

    Sir/Madam,
    I am a fresh mechanical engineer having the knowledge of design softwares like Pro-E, Autocad, AnsysI’m looking forward to have a promising position in your company where I can put my conceptual ideas into maximum practical purpose. So I request you to kindly send me an email id so that I can send my resume and apply and attend for the recruitment process
    in your firm.
    Regards,
    Rohan R

    Reply to this comment
  111. #
    sivakumar.p
    December 19th, 2007 at 10:53 am

    Respected sir,
    I have completed Diploma In Mechanical Engineering in First class with Honours in (2006)with good marks(82%)
    Explore in UNIGRAPHICS,AutoCAD
    Currently Working as a Production field
    If you have any vacancies please send me the mail-ID for suitable post for any concern
    Regards
    Sivakumar.P
    (9976145594)
    E-mail ID:psiva_flr@yahoo.com

    Reply to this comment
  112. #
    soundararajan.R
    December 19th, 2007 at 3:53 pm

    Dear sir,

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  113. #
    VAIRAMUTHU.R
    December 20th, 2007 at 11:16 am

    Dear sir,

    Kindly send me the mail ID regarding recruitment at second Plant of Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  114. #
    M.RAJKUMAR
    December 21st, 2007 at 7:17 am

    Dear sir,

    Kindly send me the mail ID regarding recruitment at second Plant of Hyundai Motor India Ltd., Chennai

    Thanking you,

    CONTACT NO +4424800321

    Reply to this comment
  115. #
    kannan M
    December 22nd, 2007 at 11:49 am

    Dear Sir / Madam,

    I am Kannan from Kanchipuram, now I am working in VSNL-TATA Indicom Broad Band as a pack Management Executive. Job description: received Broad Band, Dialup, wifi cards from HQ Bombay checking & acknowledged in the site. Keep ready for activation depends upon requirement basis of purchase order given by Distributor. I am the incharge person for activation of Internet cards for chennai reagion.

    I am handling Material, administration, activation of pin & serial No for internet, making MIS.

    I am seeking jobs in Material & Logistic-Warehouse.

    Pls help me to get good jobs in sripermbathur because of residence in kanchipuram. Every day I am comming to chennai to work in TATA Broad Band.

    Pls fwd HR email ID of COMPANY Locate in sriperbathur regarding to fwd my resume.

    Thanks & Regards
    Kannan M

    Reply to this comment
  116. #
    kannan M
    December 22nd, 2007 at 11:59 am

    Pls give me email ID of company launch in sripermbathur near chennai my contact no is : 98657 34751

    Reply to this comment
  117. #
    Aji balakrishnan
    December 22nd, 2007 at 5:39 pm

    Dear sir,

    I am aji ..I completed BE in Mechanical Engg[65%] & Diploma in automobile engg[71%]..Now I am currently working as Mechanical Trainee Engineer in KINFRA Small Industries PARK Nellad,Ernakulam Dist,Kerala [Govt. of Kerala]
    One year & one month experience as Automobile Trainee Mechanic in BROTHERS AUTOMOBILES Anchal, Kollam, Kerala.

    INTEREST in Reserch & Product design & developement In automobile field..

    Can u Kindly send me the mail ID regarding recruitment at second Plant of Hyundai Motor India Ltd., Chennai

    PROJECT TITLE. . Supercharging of S.I. Engine [DIPLOMA]-
    PROJECT TITLE. Œ. EASY FOLD RIDE’N PACK [B.E]-

    Reply to this comment
  118. #
    M.KARTHICK
    December 26th, 2007 at 9:16 am

    Sir,
    I AM KARTHICK.M[B.E(Mech)] IF ANY OPPERTUNITIES IN OUR COMPANY , INFORM TO ME
    THANK YOU

    Reply to this comment
  119. #
    Arun kumar.G
    December 27th, 2007 at 1:36 pm

    i have completed DME in
    tirupattur polytechnic college
    on April 2004.
    my apprenticeship in Brakes
    India Limited 18-07-2007 to
    17-12-2007. Searching for a
    better job to my Qualification
    & skill.

    Reply to this comment
  120. #
    sivaram
    December 27th, 2007 at 2:05 pm

    i finished my master of business adminstration i want to settled my career in finance sector .

    Reply to this comment
  121. #
    VINU PAULOSE T
    December 27th, 2007 at 2:55 pm

    Sir,
    iam from kerala. Ihave completed my B.Tech in ME. Ihave also completed CATIA V5. Iam lookin for a job in automobile field. So can you please send me the address on to which i can upload my resume.

    Reply to this comment
  122. #
    S.Thaiyal Paga Adityan
    December 31st, 2007 at 8:27 am

    please send the e-mail id to my address.

    Reply to this comment
  123. #
    S.Thaiyal Paga Adityan
    December 31st, 2007 at 8:27 am

    Sir,
    please send the e-mail id to my address.

    Reply to this comment
  124. #
    VASAVAGNANAN.K
    December 31st, 2007 at 5:44 pm

    Respected sir,
    I am working in cnc machines maintenance incharge from M.P.I have completed my Bsc electronic sciencs and cnc diplomo.I have knowledge of cnc machines commisioning,drives,servo motors,parameters and solved all machine problems for fanuc 10m,11m,15m series and siemens 840c,840D and plasma control systems. I want to work with in your HYUNDAI organisation for maintenance department.so pls kindly send me u r mail id to which i can applied my resume.Thank you sir.

    Reply to this comment
  125. #
    C.kasi
    January 1st, 2008 at 5:01 pm

    Dear sir,

    I am a Diplomo holder , I want to any job in hyundai.

    Reply to this comment
  126. #
    gopinath ganesh
    January 19th, 2008 at 12:39 pm

    iam from tamil nadu. Ihave completed my B.E . Ihave also completed AUTOCAD,Pro.E,Ansys. Iam lookin for a job in automobile field. So can you please send me the address on to which i can upload my resume.

    Reply to this comment
  127. #
    a.ahmed faazil
    January 22nd, 2008 at 2:14 pm

    hello sir,
    iam waiting for good job in your industry..
    please response me

    Reply to this comment
  128. #
    A Nishar Ahamed
    January 26th, 2008 at 1:46 pm

    sir/madam
    Plz send me ur web site address

    Reply to this comment
  129. #
    L.SIVAKUMAR
    February 4th, 2008 at 11:34 am

    sir,
    I am prefinal year B.E.mech student.please send me job oppurtunities in your company

    Reply to this comment
  130. #
    A.Muthu
    February 4th, 2008 at 11:45 am

    Dear Sir/Madem,

    I have completed 5 years experience in Accounts Department.

    I have completed B.com, Now I am studying M.com in Madras university.

    Kindly send your sriperumathur New Plant Requirement E-Mail or web address.

    Thanks & Regards

    Muthu

    Reply to this comment
  131. #
    m.p.omprakash
    February 4th, 2008 at 12:34 pm

    respected sir/madam,
    i am going to finish my certificate in tool and die making in march 2008 at vellore nttf centre .can u kindly say about any job vacancies in hyundai waiting for ur reply via e_mail

    Reply to this comment
  132. #
    s.arunan
    February 4th, 2008 at 1:01 pm

    Sir/Madam,
    I have ‘2′ years of experience in projects & maintenance field in ESSAR STEEL LTD.
    can i get job in our company.

    S.Arunan B.E(Mechanical)
    mob:09879101785

    Reply to this comment
  133. #
    S.KARTHICK
    February 4th, 2008 at 4:25 pm

    Dear Sir,

    I am s.karthick, Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you

    Reply to this comment
  134. #
    K.SHAM SURESH
    February 16th, 2008 at 4:32 pm

    Dear Sir,
    I am K.Sham Suresh I have
    Finished DME ,with 8years
    Experience.Kindly send me the
    mail ID regarding recruitment
    at Hyundai Motor India Ltd.,
    Chennai.
    If you have any vacancies
    currently plz. send me the
    mail ID to which i want to
    mail my resume.

    Reply to this comment
  135. #
    K.SHAM SURESH
    February 16th, 2008 at 4:36 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    If you have any vacancies currently pl. send me the mail ID to which i want to mail my resume.

    Reply to this comment
  136. #
    udhaya kumar. r
    February 16th, 2008 at 5:26 pm

    Respected sir i had finished my degree B.E-Mechanical during the year 2007(FRESHER). Please give me job vacancies in chennai through email…

    cell:9962647426

    Reply to this comment
  137. #
    Arvind.B
    March 17th, 2008 at 2:08 pm

    Respected Sir,

    I had completed my Diploma in Mechanical Engg. during the year 2007 and i am working as a faculty in CADD CENTRE Training Services Pvt Ltd. for the past one year and handling classes on Auto-CAD, Pro/E, CATIA V5R14 & R16 and I am working for six months on SOLID-EDGE. If you’ll have any job vacancies at Hyundai motors, Chennai, I kindly request your goodself to send me the E-mail ID to which i have to send my resume.

    Thanking you,

    Reply to this comment
  138. #
    N Karunaharan
    March 23rd, 2008 at 7:08 pm

    Respected sir,
    Requesting for the e-mail id of hyundai motors to contact and send the soft copy of resume for recruitment
    with regards
    KARUNAHARAN

    Reply to this comment
  139. #
    K. Arun EEE
    March 30th, 2008 at 9:15 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    If you have any vacancies currently pl. send me the mail ID to which i want to mail my resume.

    cell no. 9994301614

    Reply to this comment
  140. #
    N.ABUTHAHIR
    April 1st, 2008 at 12:14 pm

    Respected sir,
    I’am going to finis my B.E MECHANICAL in may (2008).still now i have the aggregate of 78%.with (first class distinction).I willing to post my resume to hyndai automobile ltd.please send e-mail id to post my resume.

    Reply to this comment
  141. #
    N.ABUTHAHIR
    April 1st, 2008 at 4:53 pm

    RESPECTED SIR,
    i’am going to finish BE MECHANICAL on may 2008.i willing to post my resume to hyndai motar india ltd. so kindly send me the e-mail id regarding recruitment at hyndai motar india ltd.

    cell no; 9791801129
    with regards
    abuthahir

    Reply to this comment
  142. #
    manimegalai
    April 11th, 2008 at 4:32 pm

    Respected sir
    I am going to finish my M.Sc(Industrial Electronics).I want to place in MNC company like HYUNDAI,FORD,WIPRO ,TCS.so kindly send the respected dignitaries email id .
    I

    Reply to this comment
  143. #
    chinnamani.M
    April 25th, 2008 at 5:46 pm

    I AM A DIPLOMA IN MECHANICAL ENGINEER ,I AM WORKING IN ESSAR STEEL LTD ,SURAT WITH 3 YEARS EXPERIENCE.MY CURRENT POSTING IS JUNIOR ENGG(MAINTENANCE) SO Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  144. #
    jatender datta
    April 28th, 2008 at 5:40 pm

    i m a diploma in mechanical engg. , and post diploma in advance cad/cam/cnc . i want job in hyundai motor india ltd.
    thanks.
    my contact no. is 09814927832…..

    Reply to this comment
  145. #
    Rajith
    April 29th, 2008 at 1:11 am

    Sir,
    I AM A DIPLOMA IN MECHANICAL ENGINEER And Diploma In Mechanical Cad.(Pro/Engineer, Catia V5, Autocad, Cadian).
    I’m willing to post my resume to hyndai motar india ltd. So kindly send me the e-mail id regarding recruitment at hyndai motar india ltd.

    Thanking You
    Rajith Rajagopalan

    Mob No:+919884630110

    Reply to this comment
  146. #
    Rajith
    April 29th, 2008 at 1:13 am

    Sir,
    I AM A DIPLOMA IN MECHANICAL ENGINEER And Diploma In Mechanical Cad.(Pro/Engineer, Catia V5, Autocad, Cadian).
    I’m willing to post my resume to hyndai motar india ltd. So kindly send me the e-mail id regarding recruitment at hyndai motar india ltd.

    Thanking You
    Rajith Rajagopalan

    Mob No:+919884630110

    Reply to this comment
  147. #
    kRISHNA VENI
    April 29th, 2008 at 11:05 am

    I am finished my B.SC degree at Madurai.Now I am doing MBA degree.So kindly send me the e-mail id regarding recruitment at hyndai motar India ltd

    Thanking You
    Krishna veni

    Mob No:9994023446

    Reply to this comment
  148. #
    kRISHNA VENI
    April 29th, 2008 at 11:07 am

    Sir,

    I am finished my B.SC degree at Madurai.Now I am doing MBA degree.So kindly send me the e-mail id regarding recruitment at hyndai motar India ltd

    Thanking You
    Krishna veni

    Mob No:9994023446

    Reply to this comment
  149. #
    Lakshmi Narasimhan J
    April 29th, 2008 at 10:37 pm

    Sir,

    I am commerce graduate with vast experience in accounts and administration for the past 20 years. Send me the e-mail id and enable me to apply my candidature for the relevant field as I mentioned.

    Regards,

    Narasimman J L
    Mobile: 9840986094

    Reply to this comment
  150. #
    p.Maheswaran
    May 1st, 2008 at 3:40 pm

    RESUME
    P.Maheswaran
    Email: maheswaran 1983@yahoo co. in
    E-44 15th 2nd cross street
    Periyar Nagar
    Chennai –82
    Cell No-9345623557
    ———————————————————————————————————————

    CAREER OBJECTIVE:
    Seeking a challenging position is an organization where my qualification and experience can be shared and enriched

    WORK EXPERIENCE:

    Employment (1): Aug 2004 to July 2006
    Designation: Audit Assistant
    Employer: Mr.Krishna Moorthy CA

    • Preparation of internal audit report and stock and reports
    • Performed all reconciliation (Debtors creditors and Bank reconciliation)
    • General ledgers scrutinizes and review of bank and cash transaction
    • Worked as a member in stock audit team for implementing the inventory management systems.

    Employment (2): Aug 2006 to Jan 2008
    Designation: Accounts cum office Assistant
    Employer: Agarsen college-Madhavaram

    • Handling ledger posting in connection with cash receipts and payments
    • Review of bank and cash transaction and performed bank Reconciliation
    • Co-ordinate with senior management in order to work towards in goals of organization
    • Reporting to management in respect of day to day performance
    • Attend the students at front office

    Employment (3): Jan 2008 to April 2008
    Designation: Accounts Assistant
    Employer: Indian Furniture Products Ltd
    • Preparation of Invoice
    • TDS transaction
    • Sales Tax correspondantence

    EDUCATIONAL QUALIFICATION:

    Bachelor of commerce from S.CHATTANATHA KARAYALAR Art & Science college-Thenkasi (Madras University) 2001-2004.

    Pursuing MBA (Finance) in Madurai Kamaraj University – Madurai

    COMPUTER KNOWLEDGE:

    Basics, MS-office (word, excel, power point)
    Tally 6.3 & 7.2

    PERSONAL PROFILE:

    Date of Birth: 02.03.1983

    Nationality: Indian / Hindu

    Marital: Single

    Permanent address: 55A Sri Selva Vinayakar Kovil street
    Shencottai- 627809,Tirunelveli Dist

    Languages known: Tamil & English
    (Written & spoken)

    DECLARATION

    I here by declare that above information is true and correct to the best of my knowledge and belief

    Place: Chennai

    Date:
    (P.Maheswaran)

    Reply to this comment
  151. #
    K.Dharma Senthil
    May 2nd, 2008 at 12:21 pm

    Respected Sir,

    I had completed my Diploma in Mechanical Engg. I am working as a Techanical Asst (CAD/CAM LAB) in A.V.C.College of Engineering for the past Nine year and handling classes on Auto-CAD, Pro/E2001,Pro/E wild fire,Solidwork,Autodest Inventor,Unigraphics, CATIA V5R14 & R16 ,If you’ll have any job vacancies at Hyundai motors, Chennai, I kindly request your goodself to send me the E-mail ID to which i have to send my resume.

    Thanking You
    K.Dharmasenthil

    Mob No:9842798539

    Thanking you,

    Reply to this comment
  152. #
    HISRIPRIYA
    July 9th, 2008 at 10:34 pm

    RESPECTED SIR / MADAM

    I AM SRIPRIYA I HAVE FOUR EXPERIENCE IN TELECALING LINE I HAVE COMPLETE MY MSC(NUTRITION AND DIETITICS) IF YOU VACCANCY FOR BPO JOBS KINDLY EMAIL ME OR CONTACT ME..

    THANKING YOU
    H.SRIPRIYA

    MAIL:sri.priya400@gmail.com
    9962016098- mobile no..

    Reply to this comment
  153. #
    RS PRADEEP
    July 11th, 2008 at 6:53 pm

    respected sir/madam
    i m a diploma holder in automobile engineering if there is any vacancy please inform me.I had worked in ford visteon for 6 months as a act apprentice.
    no 1, dhamodaran street, vanuvampet, chennai-600091.

    Reply to this comment
  154. #
    M.Balaji
    July 15th, 2008 at 8:29 pm

    Respected sir/madam,

    i am doing prefinal year Mechanical engineering, i am having an aggregate of 85% till now.so kinly send me a e-mail id of recruitment section of hyundai motors.

    Reply to this comment
  155. #
    M.SRINIVASAN
    July 20th, 2008 at 5:40 pm

    M.SRINIVASAN No.11, Papathiaman koil Street,
    Sathuvachari,
    Vellore – 632 009.
    Cell : 09739837004
    9487227166
    E mail : sivasrinivasan25@yahoo.com

    OBJECTIVE

    I would like to work in a very challenging milieu where I can judiciously combine my present skills and also learn to adapt myself to new technique and I feel with my sedulous approach to work. I would grow along with the organisation to set goals and high standards of living.

    PERSONAL INFORMATION

    Father’s Name : A.Margabandu (Late)

    Date of Birth : 31/07/1982

    Gender : Male

    Marital Status : Unmarried

    Languages Known : Tamil, English & Kanadam

    Nationality : Indian

    TECHNICAL QUALIFICATION

    Branch of Study : DIPLOMA IN MECHANICAL ENGINEERING

    College : Sri Venkateswara Polytechnic College, Vellore – 11.

    Percentage : 83%

    Year of Completion : April 2004

    Elective Theory : Metrology and Machine Tool Testing
    Process Planning and Cost Estimation

    Project Work : Cylindrical Grinding Attachment in Lathe

    ACADEMIC QUALIFICATION
    • HSC

    ADDITIONAL QUALIFICATION

    • Total Quality Management (TQM)
    • Diploma in Computer Application
    • Typewriting Lower in English First Class with Distinction

    SOFTWARE

    Auto CAD

    EXPERIENCE

    Organisation : BIMETAL BEARINGS LIMITED
    Hosur-635109.
    Designation : Trainee
    Department : Factory Production Department
    Period : 24.07.2004 to 31.01.05

    Organisation : DELPHI-TVS DIESEL SYSTEMS LTD.,
    Sriperumbudur.
    Designation : Trainee
    Department : Factory Production Department
    Period : 23.02.2005 to 31.01.2006

    Organisation : BRAKES INDIA LIMITED
    Polambakkam
    Designation : Trainee
    Department : Factory Production Department
    Period : 01.03.2006 to 30.04.2007
    Organisation : MAINI PRECISION PRODUCTS PRIVATE
    LIMITED
    Bangalore
    Designation : Technician
    Department : Factory Production Department
    Period : 07.05.2007 to till date

    JOB PROFILE

    CNC - Creep Feed Grinding Machine
    CNC - Cylindrical Grinding Machine
    Centerless Grinding Machine (PARISUTH MACHNES)
    CNC - Profilator Spline Cutting Machine
    CNC - Turning Centre Programming and Setting
    (TAKISAWA, LMW, DAEWOO, DOOSAN, SANDS MACHINES)
    CNC - Vertical Machining Centre, HMC Programming and Setting
    (NTC, HYUNDAI, DAEWOO, MAKINO, SANDS MACHNES)

    ABOUT KNOWLEDGE

     TPM Activity (Total Productive Maintenance)
     FMEA
     Lean Manufacturing System
     Kaizen (Continuous Improvement)
     Increase Machine Availability time by reducing the losses
     Find out Abnormalities and take remedy actions
     Educate Operators about the Machinery and Maintenance
     Elimation of non valve added operation using Quick change tooling Human Automation Poke¬-Yoke, 5S Activities and Visual Controls
     CLI – Standards and schedules (Clean / Lube / Inspect) to reduce breakdowns.
     Create safety environment to work
     Just in Time (JIT)
     Cycle Time Estimation
     Optimization of Man, Machine Time

    DECLARATION

    Please kindly consider my application above entires in this statement are complete and correct to the best of my knowledge and belief. I also to serve in your esteemed organization anticipating for your favourable reply.

    Thanking you Sir,

    Place :vellore Yours Faithfully,

    Date :20.07.08

    (M.SRINIVASAN)

    Reply to this comment
  156. #
    Srinivasan
    July 21st, 2008 at 10:09 am

    Respected sir,
    KINDLY SEND THE MAIL ID REGADING RECRUITMENTOF FORD,BMW,HYUNDAI,NOKIA
    THANKING YOU

    Reply to this comment
  157. #
    saravanakumar.k
    July 21st, 2008 at 8:13 pm

    Dear sir,

    Myself k.saravanakumar i am working in larsen&toubro limited company. I have completed the diploma in electrical & electronics engineering(passed year april 2003).my experience in l&t last five years three months in electrical field.Last three years i am working delhi and rajasthan surounding areas.Now i am like to working in your hyndai motor india ltd.

    Reply to this comment
  158. #
    k.saravanakumar
    July 21st, 2008 at 8:28 pm

    DEAR SIR,

    My k.saravanakumar i am working in larsen &toubro limited. I have completed the D.E.E.E. LAST YEAR APRIL 2003.I am working L&T last 5 years 3 months electrical field .Now i like to working in your hyndai motor ltd company.so, pls send me your E-MAIL ID.

    THANKING YOU,
    K.SARAVANAKUMAR

    (MOBILE NO-09887786689)

    Reply to this comment
  159. #
    sankar
    July 23rd, 2008 at 8:11 pm

    sir,
    kindly send me the email regading recruitment in hyundai,nokia,motorola,perlos,L&T.
    contact mob no.9994151338
    Address; 463,indira nagar, rice godown back, anaicut road, walajapet 632513. vellore dist. Tamilnadu. India.

    Reply to this comment
  160. #
    RAGHAV KUMAR
    July 24th, 2008 at 8:27 pm

    sir,
    kindly send me the email regading recruitment in any MNC related to TOOL & DIE MAKING.

    THANK YOU

    Reply to this comment
  161. #
    nainar
    July 25th, 2008 at 9:22 am

    dear sir
    i finished diploma ece in 2007 pleas give me as a jop to me

    Reply to this comment
  162. #
    Sourav Kumar Laik
    July 25th, 2008 at 9:56 pm

    Respected Sir/Madam
    I am a 2nd Year student of foriegn trade in Brihan Maharashtra College Of Commerce , University Of Pune.Sir/Madam could u please send me the email id and contact info of Hyundai chennai plant so that i can apply for an internship in ur prestigious and esteemed company.
    I hope u will accept my word of request and will reply soon.
    Sir/Madam you can email me at sourav_laik2008@yahoo.co.
    Thanking You

    Yours Sincerely
    Sourav Kumar Laik

    Reply to this comment
  163. #
    shanojthomas
    July 31st, 2008 at 6:12 pm

    Respected sir,
    I am working in hyundai & kia spare parts from the last 10 years in u a e (juma al majid ) now i am planing to seteled in india. i am diploma holder in auto mobile.i am intrested to work with in your HYUNDAI orgnisation in spare parts/whare house department.so pls kindly send me u r mail id to which i can applied my resume.Thank you sir.

    Reply to this comment
  164. #
    K.Sankar
    August 1st, 2008 at 4:24 pm

    I am finished my M.A.,M.L.I.Sc., degree at Chennai.Now I am doing MBA degree.So kindly send me the e-mail id regarding recruitment at hyndai motar India ltd

    Diploma Course ( PGDCA)

    Thanking You

    Reply to this comment
  165. #
    Eswaran D
    August 4th, 2008 at 7:27 pm

    Dear Sir/Madam,

    This is eswar,Working with leading MNC, With 5 Yrs enough experience in Mold maintainence, if you could give me a chance to serve you, i will prove myself and do betterment for the company,

    Regards
    D Eswar

    Reply to this comment
  166. #
    Elangovan.K
    August 6th, 2008 at 7:12 pm

    SSir,
    Pls send email id for recruitments.i am B.E Mechanical engineer with 2 years exp in automobile industry……

    Reply to this comment
  167. #
    Elangovan.K
    August 6th, 2008 at 7:14 pm

    Sir ,
    Pls send email id for recruitments.i am B.E Mechanical engineer with 2 years exp in automobile industry……Now i would like to working in your hyndai motor india ltd.

    Reply to this comment
  168. #
    M.Y.RASEEN
    August 11th, 2008 at 7:00 pm

    Dear Sir,
    I am fresher.I have diploma in ITI Motor mechanic.
    I want to job in and training automobile.If u have any
    chance pls inform me.
    Thanks and regards.
    My address:North 6th St,No:7/246E/1,IInd Cross St,
    Eruvadi.p.o.627 103.
    Tirunelveli Dist.

    Reply to this comment
  169. #
    tT.BHUVANESWARAN
    August 14th, 2008 at 1:07 pm

    Sir,iam finshed in DEEE.iam fresher.i want do job any.plese information.

    Reply to this comment
  170. #
    Rangarajan.D
    August 16th, 2008 at 5:17 pm

    Dear Sir/Madam

    i have send me my resume please reply for u

    Reply to this comment
  171. #
    ASHOK KUMAR
    August 18th, 2008 at 8:04 pm

    SIR,
    I AM ASHOK KUMAR,I HAVE DME WITH CNC TURNING 5 YEARS EXP .
    NOW I AM WORKING IN ASB INTERNATIONAL P LTD,MAHARASTRA.
    i want hyundai miotor india ltd
    mail id.
    Thanks sir,
    M.Ashok kumar

    Reply to this comment
  172. #
    R.PALRAJ
    August 19th, 2008 at 12:53 am

    Palraj R
    P h: 04562295210
    E-Mail: care_rpr@sify.com

    CAREER OBJECTIVE:

    To constantly learn and exhibit my intellectual skills, implement new innovations and to mobilize the best communication working with the organization

    ACADEMIC DETAILS:

    COURSE BOARD / UNIVERSITY INSTITUTION YEAR OF PASSING % OF MARKS
    OBTAINED
    SSLC STATE BOARD
    KSG, GOVT. HIGH SCHOOL,
    AMATHUR
    APR 2000 74
    Diploma In Electronics & Communication Eng. DIRECTION OF TECHNICAL EDUCATION ARASAN GANESAN POLYTECHNIC, SIVAKASI APR 2003
    80.66

    COMPUTER PROFICIENCY:

    Languages: C/C++

    Packages: MS Office Package

    Database : SQL,UNIX,MSDOS

    OTHER INDUSTRY SKILLS

     7 QC TOOLS
     Supervisor Skills
     Soldering Iron
     ISO 14001

    Work Experience

    Employed with Lucas-TVS, Pondy as Trainee from Mar 2006 till Mar 2007

    Domain – Worked with Customer Order Processing (Marketing System) & KANBAN (Production System)
    Role:
     Customer Order Generation
     Invoice generation
     Daily report generation like RG1
     Lorry receipt (LR) Collection
     Stock verification
     Customer follow up
     Using SQL 6.0 Ready made Scripts
     Kanban System Workflow
     Weekly / Month Planning

    COLLEGE PROJECT INFO:

    Title: Electronic Code Lock
     Use digital codes for electronic locking of doors etc.
     Acquire the code for releasing the lock
    Worked in a team of 5 members
    Role:
    Assembled the Burglar Alarm using Relay.

    AREAS OF INTEREST:

     UPS Servicing
     Mobile Mechanism
     MARKETING

    GOAL AND STRENGTH:
    To become a good leader and influential person with consistent learning and be instrumental for the well being of the organization.

    Strengths:
     Ability to be calmly active and creative amidst pressure
     Positive approach.
     Flexible and adaptable to changes.

    PERSONAL INFORMATION:

    Father’s Name : RAJAGOPAL .C
    Date of Birth/Sex : 11TH April 1985/Male
    Languages known : English, Tamil
    Address for Communication : 3\27,West Street,
    Kavundampatti Vellure Post,
    Amathur Vazhi,
    Virudhunagar Dist., Tamil Nadu, Virudhunagar - 626005
    Phone Number : 04562295210

    I hereby acknowledge that the above given information are correct to the best of my knowledge

    Place : Virudhunagar Palraj R
    Date :

    Palraj R
    P h: 04562295210
    E-Mail: care_rpr@sify.com

    CAREER OBJECTIVE:

    To constantly learn and exhibit my intellectual skills, implement new innovations and to mobilize the best communication working with the organization

    ACADEMIC DETAILS:

    COURSE BOARD / UNIVERSITY INSTITUTION YEAR OF PASSING % OF MARKS
    OBTAINED
    SSLC STATE BOARD
    KSG, GOVT. HIGH SCHOOL,
    AMATHUR
    APR 2000 74
    Diploma In Electronics & Communication Eng. DIRECTION OF TECHNICAL EDUCATION ARASAN GANESAN POLYTECHNIC, SIVAKASI APR 2003
    80.66

    COMPUTER PROFICIENCY:

    Languages: C/C++

    Packages: MS Office Package

    Database : SQL,UNIX,MSDOS

    OTHER INDUSTRY SKILLS

     7 QC TOOLS
     Supervisor Skills
     Soldering Iron
     ISO 14001

    Work Experience

    Employed with Lucas-TVS, Pondy as Trainee from Mar 2006 till Mar 2007

    Domain – Worked with Customer Order Processing (Marketing System) & KANBAN (Production System)
    Role:
     Customer Order Generation
     Invoice generation
     Daily report generation like RG1
     Lorry receipt (LR) Collection
     Stock verification
     Customer follow up
     Using SQL 6.0 Ready made Scripts
     Kanban System Workflow
     Weekly / Month Planning

    COLLEGE PROJECT INFO:

    Title: Electronic Code Lock
     Use digital codes for electronic locking of doors etc.
     Acquire the code for releasing the lock
    Worked in a team of 5 members
    Role:
    Assembled the Burglar Alarm using Relay.

    AREAS OF INTEREST:

     UPS Servicing
     Mobile Mechanism
     MARKETING

    GOAL AND STRENGTH:
    To become a good leader and influential person with consistent learning and be instrumental for the well being of the organization.

    Strengths:
     Ability to be calmly active and creative amidst pressure
     Positive approach.
     Flexible and adaptable to changes.

    PERSONAL INFORMATION:

    Father’s Name : RAJAGOPAL .C
    Date of Birth/Sex : 11TH April 1985/Male
    Languages known : English, Tamil
    Address for Communication : 3\27,West Street,
    Kavundampatti Vellure Post,
    Amathur Vazhi,
    Virudhunagar Dist., Tamil Nadu, Virudhunagar - 626005
    Phone Number : 04562295210

    I hereby acknowledge that the above given information are correct to the best of my knowledge

    Place : Virudhunagar Palraj R
    Date :

    Reply to this comment
  173. #
    Edwin Aldrin.S
    August 20th, 2008 at 9:57 pm

    Respected sir/madam, I have completed B.E(EEE) in 2008, being given understands that there are vacancies in your esteemed organization for the above mentioned post. I would like to apply for the same. I hope that you will give me a chance to work under your kind control and offer me an opportunity to prove my abilities. Thanking you,
    yours truly
    (Edwin Aldrin.S)

    Reply to this comment
  174. #
    joe
    August 21st, 2008 at 11:02 am

    send me any requrimenmts availabe in hudai company

    Reply to this comment
  175. #
    manikandan s
    August 23rd, 2008 at 3:02 pm

    Sir/madam,
    sir ,
    i am manikandan. I have completed my B.E Automobile engineering and having one year experience in service
    field. Kindly mail me if the jobs matching for my profile.

    Thanking you.

    sincerely,
    Manikandan S

    Reply to this comment
  176. #
    Mahendra prasad gupta
    August 23rd, 2008 at 8:04 pm

    Dear sir, I am pg diploma in personnel management and Industrial relations with 18 yrs experience in automobile in Indian Air Force.If I am required in your company pl inform me.

    address-
    P(T) SQN
    MTTI AIR FORCE AVADI
    CHENNAI-600055

    Reply to this comment
  177. #
    S.Manimaran
    August 27th, 2008 at 7:37 pm

    I have completed my course Diploma in Tool & die eng in coimbatore with 1 year experience in commercial tool room in chennai .I am willing to join in ur company and i to be a challenging person reputed for your organisation.

    my contact num-9962703980
    designation chennai

    Reply to this comment
  178. #
    karthik
    August 29th, 2008 at 9:11 pm

    hai

    pl send hyundai recruitment e-mail id to g_karthik1986@yahoo.com

    Reply to this comment
  179. #
    sarathy
    August 30th, 2008 at 3:45 pm

    Sir,

    Please send hundai recruitment to my e-mail sarathee79@yahoo.co.in

    Reply to this comment
  180. #
    sarathy
    August 30th, 2008 at 5:26 pm

    please send hundai job vaccancy to

    Reply to this comment
  181. #
    sarathy
    August 30th, 2008 at 5:31 pm

    Please send hundai recruitment to my e-mail sarathee79@yahoo.co.in

    Reply to this comment
  182. #
    A . vinoth kumar
    August 30th, 2008 at 6:22 pm

    Iam an B.B.A graduate. Doing M.B.A in Madras University through correspondence. I have an experience in planning Department as well as in raw material stores in Mitsubishi Heavy Industries India Precision Tools Pvt Ltd.If u give a chance to work in ur organisation. I will work hard to improve the potential of the co. Iam keenly Awaiting for ur kind result
    Thank you

    Reply to this comment
  183. #
    A . vinoth kumar
    August 30th, 2008 at 6:23 pm

    Iam an B.B.A graduate. Doing M.B.A in Madras University through correspondence. I have an experience in planning Department as well as in raw material stores in Mitsubishi Heavy Industries India Precision Tools Pvt Ltd.If u give a chance to work in ur organisation. I will work hard to improve the potential of the co. Iam keenly Awaiting for ur kind result
    Thanking you

    Reply to this comment
  184. #
    N. Ramasamy
    September 1st, 2008 at 2:21 pm

    Hai sir, I am Ram. I have done by BBA. I have computer knowledges. I am join in your company.so please give recuirement ID very soon, please. Thanking you sir. My Cell No: 9884939033.

    Reply to this comment
  185. #
    A.MURUGANANTHAM
    September 3rd, 2008 at 11:54 pm

    CURRICULUM VITAE

    MURUGANANTHAM.A
    62,Mannarkudi street,
    Chidambaram-608001.
    Cell: 90036 05002 & 98651 14630
    E-mail: cam_ananth@yahoo.co.in

    OBJECTIVE:

    To utilize my creativity and knowledge, to add value to my work in the company hethereby benefiting the organization, which in turn helps me to achieve my career goals.

    EDUCATION:
    2004-2008 B.E (ELECTRICAL AND ELECTRONICS ENGINEERING ) :OGPA 8.65

    Annamalai University, Annamalai nagar.

    semester GPA
    1 7.17
    2 8.30
    3 7.39
    4 8.43
    5 9.25
    6 8.96
    7 9.36
    8 8.50

    CLASS OBTAINED : FIRST CLASS WITH DISTINCTION

    2002-2004 12th Std 79.82%
    Ramasamy chettiyar town higher secondary school, Chidambaram.

    2001-2002 10th Std 68.3 %
    Srinivasa higher secondary school,Melaiyur, Poombuhar.

    FIELD OF INTEREST:

    • Electrical Machines.

    • Electronics.

    PROJECT:

    • Design of load frequency control of two-area interconnected power system using
    Redox flow battery.

    Best Project Work in final B.E.(Electrical & Electronics) in the year 2008-2009.

    EXTRA CURRICULAR ACTIVITIES AND HOBBIES:

    • Participation in NSS activities.

    • Playing Cricket, Volley ball, Swimming.

    STRENGTH:

    • Able to work and stay focused under pressure.

    • A strong will power with desire to contribute and succeed.

    PERSONAL DETAILS:

    Name : A.Muruganantham.
    Father’s Name : C.Arumugam.
    Gender : Male.
    Nationality : Indian.
    Date of Birth : 7th April 1987.
    Marital Status : Bachelor.
    Languages Known : English, Tamil.

    DECLARATION:
    I hereby declare that the above information’s are true to the best of my knowledge. I assure you sir that if I am given a chance, I will execute my work to the fullest satisfaction of my superiors.

    Place: Chidambaram

    Date: 30/08/2008

    [Muruganantham.A]

    Reply to this comment
  186. #
    Rajesh Kumar Singh
    September 5th, 2008 at 1:59 am

    Dear Sir,
    I am a diplom in mechnical Engg.from Govt. polytecnic sanjay Gandhi poly.jagadishpur Sultanpur.and I have some Experiance in power plant only 6 years.
    Kindly send the infometion for suitable post.
    Thanking You
    Rajesh Kumar Singh
    rks_mech@yahoo.co.in

    Reply to this comment
  187. #
    N.ABUTHAHIR
    September 6th, 2008 at 5:00 pm

    Dearsir,
    Iam of B.E mechanical(distinction),i requsting u to send e-mail id regarding recruitment in hyndai.

    THANKING YOU
    N.ABUTHAHIR

    Reply to this comment
  188. #
    Satish Patil
    September 11th, 2008 at 7:53 pm

    Hello,

    I Mr.Satish.S.Patil working im MNC company.

    I looks for the vaccancy in purchase dept.

    I hope you will be give the reply to me.

    Regards,

    Satish.S.Patil

    Regards

    Reply to this comment
  189. #
    Mahendra prasad gupta
    September 13th, 2008 at 9:00 pm

    Sir, I am having 17 yrs experience in Automobile in Indian Air Force and I have done PG Diploma in personnel management & Industrial relations.Please send hundai recruitment to my e-mail mohi121@rediffmail.com
    thank you.

    Reply to this comment
  190. #
    SIVA N
    September 16th, 2008 at 12:59 pm

    dear sir,
    iam a BE mechanical with 70%.I looks for the vaccancy in purchase dept.

    I hope you will be give the reply to me.

    regards,
    siva nagendran
    996568449

    Reply to this comment
  191. #
    M KUMAR
    September 20th, 2008 at 4:10 pm

    sir, i have ten year experience in dealer workshop i am a sap mm certified consultant(fresher) give me a chance to work with hyundai

    Reply to this comment
  192. #
    M KUMAR
    September 20th, 2008 at 4:11 pm

    my mobile no 9894855998

    Reply to this comment
  193. #
    Dhamodharan
    September 20th, 2008 at 6:40 pm

    I am DME holder. I have nearly 3 + years of experience in mechanical and management area. Please ,can you let me know the email id Hyundai.com.
    Mobile number: 09886162362
    House number: 04282230180
    Regards
    Dhamodharn

    Reply to this comment
  194. #
    M. SRINIVASAN
    September 20th, 2008 at 8:25 pm

    M.SRINIVASAN No.11, Papathiaman koil Street,
    Sathuvachari,
    Vellore – 632 009.
    Cell : +91 9739837004
    +91 9487227166
    E mail : mathisrini@gmail.com
    mathisrini@rediffmail.com

    OBJECTIVE

    I would like to work in a very challenging milieu where I can judiciously combine my present skills and also learn to adapt myself to new technique and I feel with my sedulous approach to work. I would grow along with the organisation to set goals and high standards of living.

    PERSONAL INFORMATION

    Father’s Name : A. Markabandu (Late)

    Date of Birth : 31/07/1982

    Gender : Male

    Marital Status : Unmarried

    Languages Known : Tamil, English & Kanadam

    Nationality : Indian

    TECHNICAL QUALIFICATION

    Branch of Study : DIPLOMA IN MECHANICAL ENGINEERING

    College : Sri Venkateswara Polytechnic College, Vellore – 11.

    Percentage : 83%

    Year of Completion : April 2004

    Elective Theory : Metrology and Machine Tool Testing
    Process Planning and Cost Estimation

    Project Work : Cylindrical Grinding Attachment in Lathe

    ACADEMIC QUALIFICATION
    • HSC

    ADDITIONAL QUALIFICATION

    • Total Quality Management (TQM)
    • Diploma in Computer Application
    • Typewriting Lower in English First Class with Distinction

    SOFTWARE

    Auto CAD

    EXPERIENCE

    Organisation : BIMETAL BEARINGS LIMITED
    Hosur-635109.
    Designation : Trainee
    Department : Factory Production Department
    Period : 24.07.2004 to 31.01.05

    Organisation : DELPHI-TVS DIESEL SYSTEMS LTD.,
    Sriperumbudur.
    Designation : Trainee
    Department : Factory Production Department
    Period : 23.02.2005 to 31.01.2006

    Organisation : BRAKES INDIA LIMITED
    Polambakkam
    Designation : Trainee
    Department : Factory Production Department
    Period : 01.03.2006 to 30.04.2007
    Organisation : MAINI PRECISION PRODUCTS PRIVATE
    LIMITED Bangalore
    Designation : Technician
    Department : Factory Production Department
    Period : 07.05.2007 to till date

    JOB PROFILE

    CNC - Creep Feed Grinding Machine
    CNC - Cylindrical Grinding Machine
    Centerless Grinding Machine (PARISUTH MACHNES)
    CNC - Profilator Spline Cutting Machine
    CNC - Turning Centre Programming and Setting
    (TAKISAWA, LMW, DAEWOO, DOOSAN, SANDS MACHINES)
    CNC - Vertical Machining Centre, HMC Programming and Setting
    (NTC, HYUNDAI, DAEWOO, MAKINO, SANDS MACHNES)

    ABOUT KNOWLEDGE

     TPM Activity (Total Productive Maintenance)
     FMEA
     Lean Manufacturing System
     Kaizen (Continuous Improvement)
     Increase Machine Availability time by reducing the losses
     Find out Abnormalities and take remedy actions
     Educate Operators about the Machinery and Maintenance
     Elimation of non valve added operation using Quick change tooling Human Automation Poke-Yoke, 5S Activities and Visual Controls
     CLI – Standards and schedules (Clean / Lube / Inspect) to reduce breakdowns.
     Create safety environment to work
     Improvement for Tool Life and reduced Tool Cost
     Just in Time (JIT)
     Cycle Time Estimation
     Work Standardization
     Optimization of Man, Machine Time
     Process flow Improvement and Layout formation
     Breakdown attend to Automatic Tool Change (ATC), Automatic Pallet Change(APC) and Conveyor

    DECLARATION

    Please kindly consider my application above entires in this statement are complete and correct to the best of my knowledge and belief. I also to serve in your esteemed organization anticipating for your favourable reply.

    Thanking you Sir,

    Place : Yours Faithfully,

    Date :

    (M.SRINIVASAN)

    Reply to this comment
  195. #
    M. DHANRAJ
    September 20th, 2008 at 8:28 pm

    M.DHANRAJ,
    NO. 29/20,CHAVADI STREET,
    SATHUVACHARI,
    VELLORE TK,
    VELLORE DISTRICT,
    PIN CODE – 632 009,
    Mobile: +91 9894266046
    E-mail: dhanrajmathi@gmail.com

    OBJECTIVE:

    To secure a highly challenging career where I can effectively contribute my skills
    as a mechanical engineer and acquire new skills which enhance my innovative ideas.

    PERSONAL MISSION:

    No goal is too high if it is work up with care and confidence.

    ACADEMIC PROFILE:

    CLASS/DEGREE NAME OF THE INSTITUTION YEAR OF PASSING % OF MARKS
    D.M.E Sri Venkateswara Polytechnic collage, Vellore -11.
    April 2005 83 %
    HSC Government Hr.Sec. School, Sathuvachari,Vellore -09
    March 2003 61 %
    SSLC Government Hr.Sec. School, Sathuvachari,Vellore -09
    March 2001 60 %

    SOFTWARE SKILLS:

     MS – Excel, MS – Word, Auto-CAD,

    STRENGTH:

     Self Determination, Obedience, Concentration and Optimistic.

    PROJECT WORK:
     Design and fabrication of slotting machine

    ELECTIVE SUBJECT:
     Metrology and machine tool testing
     Automobile technology
    EXTRA QUALIFICATION:
     Total quality management TQM
     CNC Programming

    EXPERIENCE DETAILS:
    INDUSTRY: TVS - Brakes India Ltd,
    Polambakkam. (‘S’ Cam Brake Manufacturing)

    DESIGNATION: Govt.apprentice & trainee

    DEPARTMENT: Factory Production & Quality Department

    DURATION: Three Years

    JOB PROFILE:
     TPM activity (total productive maintenance)
     Increase machine availability time by reducing losses
     Educate operators about the machinery and maintenance
     Find out abnormalities and take remedy actions
     Final fitment inspection of Brake assembly
     IMS / OHSAS, EMS Activities
     Brake Assembly Material planning, assembling & despatching
     Create safety environment to work
     Knowledge of PFMEA, QC Tools, SPC, Process Flow & Control Plan.
     Knowledge of POKA YOKE, Kaizens & Individual Improvements.
     5 – S Activities
    ACHIEVEMENTS:
     Get CASH AWARD for KAIZEN IMPLEMENTATION in brake assembly.
     Have a certificate for participating a KAIZEN PRESENTATION at ANNA UNIVERSITY AU-TVS COMPETIION.

    PERSONAL PROFILE:
     FATHER’S NAME : A. MARKABANDU
     DATE OF BIRTH : 22/09/1985
     NATIONALITY : INDIAN
     SEX : MALE
     MARITAL STATUS : SINGLE
     LANGUAGES KNOWN : ENGLISH, TAMIL
     FAVORITE PURFUITS : READING, LISTENING MUSIC

    DECLARATION:

    I hereby declare that the above-mentioned information is true to the best of my knowledge.

    Thanking you.

    DATE: YOURS SINCERELY,

    PLACE:

    (M.DHANRAJ)

    Reply to this comment
  196. #
    A.P.KEERTHIK
    September 21st, 2008 at 12:24 pm

    I am ITI HOLDER FRESHER.I AM COMPUTER HARDWARE TECHNICIAN.I WANT JOB IN YOUR CHENNAI COMPANY.

    Reply to this comment
  197. #
    r.gunaneethi
    September 27th, 2008 at 7:24 pm

    Respected sir,
    I have completed dece b.e (ece) i want job in chennai comapny
    mailid: mailguna2001@yahoo.com
    thanking u

    Reply to this comment
  198. #
    PRASHANT L. PETKAR
    September 28th, 2008 at 5:58 pm

    Respected Sir,
    I have Completed my Diploma & Degree in Mechanical Branch.I have 2 years of Experience in Design. Plz send me your E-mail so I can Forward my CV to you.

    Thanks and Regards

    Prashant L. Petkar
    (9422706232)

    Reply to this comment
  199. #
    Mahendra prasad gupta
    October 2nd, 2008 at 2:52 pm

    Dear sir, I am pg diploma in personnel management and Industrial relations with 18 yrs experience in automobile in Indian Air Force.If I am required in your company pl inform me.

    E-mailID- mohi121@rediffmail.com
    Mobile No.-9840304951

    Reply to this comment
  200. #
    ASISH.M.P
    October 8th, 2008 at 7:58 pm

    respected sir,
    I am a diploma in automobile engg.holder with 1year experience from marutisuzuki its own workshop in delhi.and now working as a technical advisor in maruti service masters chennai.I have also basic knowledge of computers.I also to serve in your esteemed organization anticipating for your favourable reply.
    thanking you yours faithfuly
    Asish

    Reply to this comment
  201. #
    ASISH.M.P
    October 8th, 2008 at 8:07 pm

    Respected sir,
    I am a diploma in automobile engg.holder with 1year experience from marutisuzuki its own workshop in delhi.and now working as a technical advisor in maruti service masters chennai.I have also basic knowledge of computers.I also to serve in your esteemed organization anticipating for your favourable reply.
    Thanking you Yours faithfuly
    Asish

    Reply to this comment
  202. #
    Arun
    October 8th, 2008 at 8:16 pm

    I want to serve in your esteemed organization anticipating for your favourable reply.

    Reply to this comment
  203. #
    sathish kumar .s
    October 9th, 2008 at 5:43 pm

    kindly send me the recruitment email ID pl.

    Reply to this comment
  204. #
    Asish
    October 10th, 2008 at 7:39 pm

    Respected Sir,
    I have completed my Diploma in Automobile Engineering and i got a year experience in Maruti at delhi and also currently workin in the same organization but in chennai,i really wanted to work in your organization to the best of ability,so could you please tell me the procedures how to join your organization.
    Thanking You Your’s Faithfully
    Asish

    Reply to this comment
  205. #
    s.manikandan
    October 12th, 2008 at 7:38 am

    can u plz send me the email id of hyundai HR.
    thanks and regards,
    Manikandan.S

    Reply to this comment
  206. #
    E.Ramesh
    October 14th, 2008 at 9:28 am

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  207. #
    E.Ramesh
    October 14th, 2008 at 9:33 am

    Kindly send me the mail ID regarding recruitment at Nokia and Motorola, Chennai

    If you have any vacancies currently pl. send me the mail ID to which i want to mail my resume.

    Mail ID : rameshesr@rediffmail.com
    :rameshshanth_1984@yahoo.com
    Thanking you

    Reply to this comment
  208. #
    R ANANTHASUBRAMANIYAN
    October 14th, 2008 at 7:51 pm

    DEAR SIR
    NOW I AM WORKING AS A ACCOUNTSMANAGER FOR FIVE COMPANIES IN WESTAFRICA . FIRST I WORKED AS A ACCOUNTSMANAGER IN LARSEN&TUBRO IN INDIA .I AM COMING TO INDIA NEXT MONTH . I WANT TO SETTEL IN INDIA ITSELF. PLEASE GIVE U R WWEBSITE NAME FOR APPLYING JOBS

    Reply to this comment
  209. #
    Aji
    October 15th, 2008 at 6:19 pm

    Dear sir,

    I am aji ..I completed BE in Mechanical Engg[65%] & Diploma in automobile engg[71%]..Now I am currently working as Mechanical Trainee Engineer in KINFRA Small Industries PARK Nellad,Ernakulam Dist,Kerala [Govt. of Kerala]
    One year & one month experience as Automobile Trainee Mechanic in BROTHERS AUTOMOBILES Anchal, Kollam, Kerala.

    INTEREST in Reserch & Product design & developement In automobile field..

    Can u Kindly send me the mail ID regarding recruitment at second Plant of Hyundai Motor India Ltd., Chennai

    PROJECT TITLE. . Supercharging of S.I. Engine [DIPLOMA]-
    PROJECT TITLE. Œ. EASY FOLD RIDE’N PACK [B.E]-

    E-mail:mailtoaji@yahoo.co.in

    Reply to this comment
  210. #
    arunkumar.r
    October 28th, 2008 at 9:02 am

    sir,
    i m doing b.tech mechanical in sastra university
    final year.any job vaccancy means tell me .if, u like to use me to improve company means just email me i will send my resume…
    thanking you
    yours truely
    r.arunkumar
    arunkumar.r
    no:7 marunthu kothala kaliyamman shanathi
    nagapattinam-611001
    ph:9786872823

    Reply to this comment
  211. #
    arunkumar.r
    October 28th, 2008 at 9:06 am

    sir
    i did my project in maruthi udyog pvt lmt,delhi
    assembly shop-3

    Reply to this comment
  212. #
    Deena dayalan
    October 31st, 2008 at 11:00 am

    Respected sir;
    I am Deena dayalan from chennai i interested to join in industry and its my ambition please if there is any vaccancy please offered me iattached my resumRESUME SUMMARY

    Resume Title Update

    Resume

    Contact Information Update

    Deena Dayalan E-mail : rekha_rekkaha@yahoo.com.sg
    No.1049A, 29th Street, Phone : Not specified
    B.V.Colony, Vyasarpadi, Mobile : 91 – 9941503548
    Chennai – 600 039. Current Location : Chennai

    Personal Information Update

    Date of Birth : 25th Aug 1983
    Gender : Male
    Nationality : India

    Professional & Educational Details Update

    Work Experience : 3 Years
    Skills : Technical Experience
    Industry : Home Appliances (TV, Fridge, AC etc.,)
    Category : Others
    Roles : Other Roles
    Current Employer : Adonis Electronics Pvt Ltd.,
    Current Annual Salary : 1.20 Lacs per annum
    Previous Employer : IFB
    Highest Degree : Diploma, Sri Sai Ram
    Held
    Preferred job
    Location : Chennai

    Domain Knowledge Update

    RESUME

    Name : M. DEENA DAYALAN

    Father’s Name : R. Marimuthu

    Date of Birth : 25.08.1983

    Sex : Male

    Religion : Hindu

    Nationality : Indian

    Marital Status : Single

    Educational Qualification : SSLC

    EDUCATION PROFILE

    Qualification : Diploma in Electrical and Electronics
    Engineering

    Completed year : 2004

    Elective subject : Electrical Drawing

    ADDITIONAL QUALIFICATION:

    v Diploma Hardware in Computer Assembling
    v Software installation
    v Trouble shooting and maintenance
    v Diploma in Advance Hardware in Servicing of Monitor, SMPS, UPS, KB and Mouse.

    KNOWN LANGUAGES:

    Written : English & Tamil
    Spoken : English & Tamil

    PRESENT ADDESS:

    No.1049A, 29th Street, B.V.Colony,
    Vyasarpadi, Chennai – 39.

    WORKING EXPERIENCE:
    FRANCHISE MANAGER IN IFB, AND I MADE A OWN ORGANISATION WITH 15 MEMBERS TEAM IN AC SALES AND SERVICE,
    GROUP LEADER : ADONIS ELECTRONICS PVT LTD.,

    ONIDA CUSTOMER RELATION CENTER
    No.18, 4th Lane, Nungambakkam,
    Chennai – 600 034.

    TECHNICAL EXPERIENCE:

    v Washing Machine Service
    v Microwave Oven Service
    v Front Loading Machine Service
    v Dish Washer Service
    v Dryer Service

    SPECIAL INTEREST:

    v Interest to working in Machineries
    v Interest to work for limited company
    v Interest to know more thing about machines

    JOB RESPONSIBILITIES:

    v Assembling and Dismantling the machines
    v Feedback collected from technician
    v Quality feedback given to HR
    v Call Allocation to the Technician
    v Dealers Visit
    v Trouble Shooting

    WORKING EXPERIENCE:

    v Working in Adonis for past 3 years.

    Place : Chennai Yours sincerely,
    Date :

    (M. DEENA DAYALAN)

    e

    Reply to this comment
  213. #
    Arulmurugan.M
    October 31st, 2008 at 12:30 pm

    Respected Sir,
    I have Completed my Diploma in Mechanical.I have 2 years of Experience in production. Plz send me your E-mail so I can Forward .

    Thanks and Regards

    M.arulmurugan

    Reply to this comment
  214. #
    N.Manikandan
    October 31st, 2008 at 3:11 pm

    Dear Sir,

    I am finished in B.Com and (Tally,SAP) , now i am working in Birla Group (Madura Garments). My work place warehouse Supervisor. Shall i send my resume, I any vaccancy pls inform me Sir,

    Reply to this comment
  215. #
    karthikeyan.k
    November 1st, 2008 at 11:45 am

    Respected Sir,
    I have Completed my Diploma & Degree in Mechanical Branch.I have 4 month of Experience in Design. Plz send me your E-mail so I can Forward my CV to you.

    Thanks and Regards

    Prashant K.karthikeyan

    Reply to this comment
  216. #
    iniyavan
    November 4th, 2008 at 9:42 pm

    respected sir,
    i am doing my final year diploma in mechanical engg .if any job vancany please send your email id. if your selected me i do BEST .i kindly requrest you pls selsect me sir.

    Place:karaikudi
    Date: 04.11.2008

    mobile no: 9751095769

    Reply to this comment
  217. #
    iniyavan
    November 4th, 2008 at 9:43 pm

    comment is awaiting moderation.

    respected sir,
    i am doing my final year diploma in mechanical engg .if any job vancany please send your email id. if your selected me i do BEST .i kindly requrest you pls selsect me sir.

    Place:karaikudi
    Date: 04.11.2008

    mobile no: 9751095169

    Reply to this comment
  218. #
    S.NARAYANAN
    November 9th, 2008 at 8:54 am

    Respected Sir,
    I have completed MY diploma in ELECTRICAL&ELECTRONICS ENGG.
    I have 1 Year Expericience in TEXMO INDUSTRIES,Coimbatore, and then
    10 months working in MARS MEDICAL SYSTEMS & SERVICES(P)Ltd chennai.

    Thanks& Regards
    S.NARAYANAN

    Reply to this comment
  219. #
    Sekar.A
    November 11th, 2008 at 7:18 pm

    A.SEKAR
    No: 2/14, Annanedunsalai,
    Oragadam, Ambattur,
    Chennai – 600 053.
    Ph: +919884743473,9940443930
    E-mail =dreamsof_2004@yahoo.co.in

    OBJECTIVES:
    ● To derive a sense of professional achievement through challenging
    assignments in the industry.

    EDUCATIONAL QUALIFICATION:

    QUALIFICATION INSTITUTION YEAR OF
    PASSING % OF MARKS
    S.S.L.C S.R.M Hr.Sec.School,
    Ambattur, Chennai. 2003 76%
    DME (Diploma in Mechanical Engg.) John Bosco Polytechnic College, Thiruvallur. 2006 72%

    PROJECT:
    PROJECT NAME: PNEUMATIC TABLE DRIVE OF SURFACE GRINDER
    PROJECT DETAILS:
    Designed and developed in John Bosco Polytechnic College, using like compressor unit, shut off valve….etc. for the duration of 3 months. To drive the surface grinding machine (Vertical Spindle, Horizontal Table movement type machine).

    OTHER QUALIFICATION:
     PGDCA-(Post graduate diploma in computer application) at Ict in the year of 2000.
     Auto-CAD-under training at CPLR,AVADI.
    AWARDS & ACTIVITIES:
    • Ist prize in State level Technical Paper Presentation at VRP MECHMEET 2005.
    • Participated in National level Symposium at APTECH MEET 2006.
    MATERIALS HANDLING:
    * Micro meter, Vernier caliper, Ring, plain, tread gauges,
    WORKING EXPERIENCE:
    • Worked in PRAKASH ENTERPRISES at Ambattur in quality control depmnt, Electro Plating manufacturing company from July 2006 – October 2008,

    PERSONAL DETAILS:
    Name : A.SEKAR
    Father’s Name : L.Arumaidoss
    Date of Birth : 15-03-1987
    Age : 21 yrs
    Sex : Male
    Nationality : Indian
    Marital Status : Single
    E-mail : dreamsof_2004@yahoo.co.in
    Languages Known : English & Tamil, Read and wrtite.

    DECLARATION:
    I hereby declare that the above information’s are true to my knowledge.

    Place : Chennai Yours truly,
    A.sekar
    Respected Sir/Madam,
    Iam sekar, here with i attached my profile in the website, if i got oppurtunity in your concern in hyundai motors its my pleasure, i kindly request you to give me a oppurtunity in your concern, thanking you,
    With regards
    Sekar.A

    Reply to this comment
  220. #
    J.SATISH KUMAR
    December 8th, 2008 at 3:59 pm

    J.satish kumar December 8th, 2008 at 3:43 pm

    respected sir,
    I have Completed my Master Diploma in CADD & Degree in Mechanical Branch.I have 7 month of Experience in Design. If any job vancany please send your email id. if your selected me i do BEST
    Place:chennai
    Date: 08.12.2008

    mobile no: 9840760194

    Reply to this comment
  221. #
    E.KEERTHYVARMAN
    December 12th, 2008 at 5:41 pm

    respected sir,
    I have Completed my Diploma in tool&die.I have 1 year&4 month of Experience in mold making& mold Design. If any job vancany please send your email id. if your selected me i do BEST
    Place:chennai

    Reply to this comment
  222. #
    ILAYA BHARATHI
    December 27th, 2008 at 2:19 pm

    To:
    The HRD Manager
    Hyundai motors Pvt ltd
    Chennai

    Dear Sir,

    Subject: Job Aplication

    I am writing to enquire whether you have a vacancy in your organization that I might usefully fill.Please find enclosed my curriculum vitae, and references given in resume.

    I believe my records indicated that I am a dynamic person with strong personality, eager to learn and able to work independently as well as team work.

    RESUME

    Residential Address
    No.13/6 DD Road 2nd st
    Arappalayam
    Madurai -16
    Tamil Nadu

    MOBILE: 9842948259
    RESIDENCE: 9842948849

    E-mail
    bharathi_design@yahoo.co.in
    ibreachbharathi@gmail.com

    Personal Data

    Fathers name: Mookkan.K

    Date of Birth: 20.10.1985

    Gender: Male

    Nationality: Indian

    Marital Status: Unmarried

    Language known:

    Tamil, English

    Career Objective

    To obtain a full time engineering position in an organization, where I can combine my experience, knowledge and enthusiasm to both advance the company and to grow as engineering professional both functionally and technically.

    Scholastic Qualifications

    2004-2007 D.M.E

    Thanapandian polytechnic college with First class

    2001-2003 ITI Fitter

    Govt. ITI. in checkkanoorani with First class

    2000-2001 S.S.L.C

    Private school in chekkanoorani with First class

    Extra Activities

    Regional skill compertition-2003-certificate

    CAD / CAM Exposure

    Drafting Tool : Auto cad 2006

    Modeling Tool : Pro-E (wildfire3.0)
    : CATIA (V5)
    : UNIGRAPHICS(NX-4)

    Software skills
    Packages : MS-OFFICE
    Operating system : WINDOWS 98/ 2000/ XP

    Work details:

    Cadd Center : Canorous InfoTech
    Designation : Faculty
    Duration : April 2007- November 2007

    Project details while working in Canorous Infotech

    1.Name: Designing of wheel rim
    Client : Academic project
    Tools : Pro-E(Wildfire 3.0)
    Duration : One Month

    2.Name: Design modeling of brake drum
    Client : Academic project
    Tools : Pro-E (Wildfire 3.0)
    Duration : One and half month

    3. Name: 2D drafting for of Air Duct Passage
    Client : Voltas
    Tool : Auto Cad 2006
    Duration : Two months

    Presently working in Quick sort Engineering & co at Chennai

    Designation : Design Engineer
    Department : R&D

    1.Name: Designing of Back stitcher
    Client : Devon Machine Tools
    Tools : Pro-E(Wildfire 3.0)
    Duration : One Month

    2.Name: Designing of scanner
    Client : MNC project
    Tools : CATIA(V5)
    Duration : Three Months

    3.Name: Designing of Bottom Stitcher
    Client : Devon Machine Tools
    Tools : CATIA(V5)
    Duration : Two Months

    4.Name: Designing of 12 Inch bead chuck
    Client : Devon Machine Tools
    Tools : Pro-E(Wildfire 3.0)
    Duration : One Month

    5.Name: Designing of 20 Inch bead chuck
    Client : Devon Machine Tools
    Tools : Pro-E(Wildfire 3.0)
    Duration : One Month

    6.Name: Designing of Wire Cutting Machine
    Client : Avalon
    Tools : CATIA(V5)
    Duration : Two Months

    7.Name: Designing of Boiler
    Client : MNC Project
    Tools : Pro-E(Wildfire 3.0)
    Duration : Two Month

    Worked as a temporary Trainee in wheels India Limited at Chennai from August 2003 to June 2004

    I hereby declare that the information given in the resume are true upto my knowledge.

    Thank you,
    Your’s sincearly,
    M.Ilaya bharathi.

    Reply to this comment
  223. #
    s.sujith kumar
    January 2nd, 2009 at 3:41 am

    Dear Sir,

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  224. #
    sivarama krishna prabu.c
    February 2nd, 2009 at 9:09 pm

    dear sir
    i had completed my DME at OCT 2007. i am completed my apprentce trainee at RANE ENGINE VALVE,ALANDUR,Chennai.
    any requirement on automobile industry pls information to me.

    Thanks and Regards
    c.sivarama krishna prabu
    67,Arcot Road,A1/8,AWHO,parameswaran Vihar,
    Saligramam,
    chennai-93.
    Mobile:+91 9003385047

    Reply to this comment
  225. #
    P.Vaidhiyalingam
    February 5th, 2009 at 6:52 pm

    Dear Sir/Madam,

    Iam looking for openings in Mechanical Engineering category in hyundai, ford or any other reputed concern. I would like to work as a Design engineer as i had specialized in CADD and CNC(milling). I also desire for other postings suitable to y profile.

    I have a total experience of 5years.

    Currently iam working as a Technical supervisor in Cleen First Services Pvt Ltd in Singapore. Iam looking for a change and like to settle back in India. Please do inform me through phone or mail if there are any suitable openings.

    Mail: vaidhiyalingam@gmail.com
    Mobile: +6581512885

    Thanking you

    Sincerely,

    [P.Vaidhiyalingam ]

    -

    Reply to this comment
  226. #
    U.Aynudeen
    February 6th, 2009 at 7:07 pm

    Dear sir/madam,
    Pls find below of my detail resume for your information. If you have any jobs offers in Hundai pls forward through my mail id.

    BACKGROUND SUMMERY

    11 Years of proven expertise in Plastic part design,Tool/Mould design,Runnerless technology, Plastic material selection,Injection moulding optimization,Finite element analysis,Accounting,Costing,andProject management.Championed in productivity improvements.Established track record for providing engineering solutions to development of new products from concept through commercialization.Multi-tasked with good skills in project management.Excellent team player with excellent communication and organization skills. Extensive engineering,operations and manufacturing management experience in diverse companies ranging in size from start up to Fortune .Specific expertise in the plastics industry.Skilled in building highly effective teams.
    ¤ 11 years of diversified plastics experience in the Automotive,Electronics,Logistic & Packaging,Dairy products.
    ¤ Managed engineering ,tool design,manufacturing departments and complimented sales with assistance.
    ¤ Skilled in troubleshooting and problem resolution in design,tooling & processing of injeciton molds.
    ¤ Start-up operations/Organization.
    ¤ Effective in utilizing resources,Product Design & development,Mould design & Development, Mould maintenance & documentation,Tool room supervision, improving processes and reducing costs,Expertise of working in fast paced & high tech environments,Strong exposure and understanding of business strategy planning and implementing,Comprehensive problem solving abilities ,Ability to deal with people diplomatically, Willingness to learn,Team facilitator,Trend setter, Passion for new technologies & Assertiveness.

    TECHNICAL SKILLS

    ¤ Part Design : Thin wall,Tight tolerance,Finite element analysis (FEA)
    ¤ Tooling : Mold design,Runnerless molds(insulated,hot runner and hybrids)
    ¤ Moulding : Optimum molding,de-coupled(scientific)moulding,Runnerless
    Moulding.
    ¤ Prototyping : Rapid prototyping,reverse engineering.

    COMPUTER LANGUAGES AND ADVANCED SOFTWARE EXPERIENCE

    ¤ Operating systems : MS dos , Windows
    ¤ Languages : Fortran,MS office tools
    ¤ FEA softwares : I-Deas,Cosmos
    ¤ Softwares : Moldflow,Mat lab,ProEngineering,Solid works,Auto cad,
    Mechanical Desk top,Ms mold design,Ms modeler,Mechanical
    Power pack,E-drawings,Unigraphics,Photoshops,flash,corel draw,
    Swish,Mechanical programs,Electrical calculation,Engg Utility
    ¤ CNC programming : CNC milling –Mikro/Switzerland, Language – Hidinieen
    CNC lathe – Tornodo / London,Language – Fanuc

    CAREER HISTORY

    Eminent Packaging Systems co.wll.(Kingdom of Bahrain) 2004 – Present
    Product Development Design Engineer

    Working from base of the company from land purchasing,Provide consulting services with building contractors.Coordinate with building ,electrical,transport contractors.Implement the chill water lines,Fire fighting water lines,centralize material feeding,machine&mould purchasing,machine errections,Coordinate with mould makers,Provide customized consulting services to packaging & logistic industries & dairy Food(Automation industries in GCC),Expertise includes Product design and development of all plastic components,including packaging in reel-to-reel molding technology,finite element analysis(FEA),Mold design & procurement of all tooling for stamping and molding as well as packaging,Process troubles shooting and optimization,failure analysis,productivity improvement,Traveled overseas to assist plant start-up and trouble shoot tooling,trials,Plastic resin selection and pricing cooordination with our purchasing department.Working in ISO 9000 standards.

    Established and setup a model shop to produce stamped and molded components for quick turn product for new product development.

    • Reporting to MD, Project Director.
    • Design, Development, Qualification & Factory ramp support of new products.
    • Manage Customer Relationship by providing Technical Support of core services to customers.
    • Actively identify & drive new process improvements that facilitate the quality, schedule, & cost.
    • Planning and implementing business strategies to drive revenue and profitability, continuously access resource plans based on changing business conditions.
    • Customer relationship building by strong presentation skills, tactical execution, & excellent team leadership skills.
    • Trouble shooting, solving technical problems related to molding & make 8D reports
    • Responsible to solve open issues with customers in co-ordination with organizational team.
    • Creation & Analysis of techno-economic project models to derive deliverables, scalability, performance maturities, etc.,
    • Manage multiple projects, setting priorities; drive cross-functional development through conception, planning, implementation, and working independently under aggressive timelines.
    Over all Designing, Product Development, Process Trouble Shooting, Mould Maintenance, Machining, Machine Erections, Process Control, Customer Relations, Documentation, Accounting & Costing.

    Meccanica Plast Pvt.Ltd. 2001 - 2004
    (A joint venture of Meccanica R.P.C.Italy & Industrial Jewelers Germany), Mumbai, India.)
    Product Development Engineer

    Worked from base of the company. One of the largest plastic electrical & electronics component manufacture for LANDIS & GYR (VLG-SIEMENCE METERING LTD, Calcutta(India) & Switzerland. Fastener houses worldwide with online international supply chain network to operate and support customers at global level.
    One of the leading manufactures of different types of electronic gears and Metering assembly panels.

    CAREER RESPONSIBILITES:

    ¤ Reporting to Director.
    ¤ Responsible for New product development activities from design review till Sign off.
    ¤ Lead a team of Engineers looking after new projects of Customers in India, Italy, Switzerland, and Europ.
    ¤ Review the 3D & 2D data from customer and suggest improvements or modifications on the part design considering potential failures.
    ¤ To liaise with Process Engineers and vendors on all tooling.
    ¤ New Injection Mould development from mould supplier
    ¤ New Injection mould trials and process stabilization.
    ¤ Trouble shooting, solving technical problems related to molding & make 8D reports.
    ¤ Responsible for Warrant sign off of the product from customer and handover the project to production team.
    ¤ Be the key communication channel between customers, suppliers and our organization
    ¤ To coordinate with sales departments and in developing the new products or making changes in the existing products.
    ¤ To visit the customer or contact them directly to ensure the above objective is achieved effectively and efficiently.
    ¤ To prepare develop the final product drawings and coordinate with mold manufacturer in developing the new molds. Follow up with the mold maker in order to have the molds made as per the set standards, evaluation of the trail samples and attend the mold trails.
    ¤ To update the mold drawings and product drawings whenever there are changes.
    ¤ To coordinate with Tool room in making the necessary change in the mold.
    ¤ Attend the mould assembly in final stage.
    ¤ Make the process planning in tool room machine & moulds.
    ¤ Attend the mould maintains.
    ¤ Attend solve the product faults in running machines
    ¤ Follow up the all international & national standards like JIS, ANSI, ASTM, DIN, ISO, IS, BS, Cz, MIL, GOST, SN, etc.,
    ¤ Over all designing, developing, trouble shooting & mould maintenance & machining,

    Karnataka Plastcom Pvt.Ltd(Unit 3,Sri Shyam Plastic Industries) Bangalore 2000 - 2001
    Mould Designer

    One of the largest Plastic Automobile, Electrical, Electronic component manufacture for TVS AUTOMOBILES & TVS ELECTRONICS –INDIA & BPL ELECTRONICS – INDIA,MAHANDRA AUTOMOBILE - INDIA.
    CAREER RESPONSIBILITES:
    ¤ Designed and detailed plastic injection and compression molds to support a 15 man internal mold shop
    ¤ Coordinated and purchased mold tooling and supplied our vendors with basic concept drawings
    ¤ Quoted part and tooling pricing for establishing capital appropriations for all new plastic tooling.
    ¤ Worked with vendors on purchased die cast products.
    ¤ Supervised a 8 man tool shop to build prototype tooling to support new product development
    ¤ Worked with process engineer to sample and troubleshoot molds before releasing to production
    ¤ Established and evaluated cost reduction projects for feasibility and cost.
    ¤ Designed a multi-cavity compression mold and acquired patent for molding electric motors.

    EDUCATION

    PD-PMD
    (Plastic mould design) Central Institute of Plastic Engineering & Technology (CIPET )
    Bhubaneswar , India A-Grade
    All India 6th Rank 1999-2000
    DPMT
    (Plastic mould Technology) Central Institute of Plastic Engineering & Technology
    (CIPET)
    Hyderabad ,India A-Grade
    All India 11th Rank 1996-1999
    CAD experience, Pro-Engineer, Solid Edge, AutoCAD,CAM,CAE, UnigraphicsNX3&4, Cadkey,

    PROJECT WORKS

    PD-PMD
    (Plastic mould design) Design and development of ROTO MOULD (leisure products) for 5’’ BALL in multi impression. ROTO MOULD (8 Impression) ORI PLAST PVT LTD (BALASURE) INDIA
    CIPET – Bhubaneswar , India 1999-2000
    DPMT
    (Plastic mould technology) Programming and execution of job in CNC Machines & Machining in CNC LATHE & CNC MILLING. INJECTION MOULDING(01 Impression) SPINING CAP FOR WASHING MACHINE (VIDEOCON)
    CIPET – Hyderabad ,India 1996-1999
    INJECTION MOULDING MACHINE EXPERIENCE SKILL

    ¤ Haitian M/c Made in china HTF 780, 2800, 3300 ton machine
    ¤ Engel M/c Made in Austria 50, 80, 120, 160, 250, 550, 1200 ton
    ¤ Windsor M/c Made in India SP 130,160 ton
    ¤ LG M/c Made in Korea IDE 100, 160, 750, 1000, 1600 ton

    BLOW MOULDING MACHINE EXPERIENCE SKILL

    ¤ Techne M/c Made in Italy 40000 T – 660
    ¤ Kosme M/c Made in Austria

    STRAP MACHINE EXPERIENCE SKILL

    ¤ Jumbo Steel M/c Made in Taiwan PP strap

    PRINTING MACHINE EXPERIENCE SKILL

    ¤ Meccanica M/c Made in Italy Hot stamping (Printing)
    ¤ Meccanica M/c Made in Italy Ultra sonic (Cleaning)

    TOOL ROOM MACHINE EXPERIENCE SKILL
    ¤ CNC milling(Milkro ) Made in Switzerland CNC machine
    ¤ CNC lathe (Tornodo) Made in London CNC machine
    ¤ HMT, F12V, Padmini milling machine Made in India NC & manual machine
    ¤ Gedee Weiler (Collect attachment) Lathe Made in England NC & manual machine
    ¤ HMT, Padmini (Collect attachment) Lathe Made in India NC & manual machine
    ¤ Tool Craft (EDM) Made in Italy NC & manual machine
    ¤ HMT surface grinding machine Made in Italy Manual machine
    ¤ AB wood (Surface grinding machine) Made in England NC & manual machine
    ¤ Dart frd kent (Surface grinding machine) Made in England NC machine
    Pentagraph,copy milling,drilling,radial drilling,Press,tool grinding,cylinderical grinding machines etc.

    QUALITY CHECKING MACHINE EXPERIENCE SKILL

    ¤ 2X, 4X Microscope, DRO Made in India
    ¤ Tensile Strength Checking machine Made in China
    TECHCELLENCE
    ¤ State of art Manufacturing Technologies, Appropriate & Multi-functional Engineering
    ¤ Assembly and Integration Technologies, Precision Engineering
    ¤ R & D Tooling, Advance Tool Engineering
    ¤ Product Design, Plastic mould design
    Parameter settings and handle all type of injection molding machines and blow molding machines & moulds.

    ACCOMPLISHMENTS
    ¤ Lead Prime Tooling Participation Team at ToolTech 98, held in Mumbai.
    ¤ Comprehensive Familiarity of Indian Mechanical Component Market
    ¤ Good Knowledge of Global Fastener Industry
    ¤ Demanding expertise in Manufacturing Domain

    HOBBIES
    Attending various cultural & Technical activities, reading Technical Magazines.
    Gardening, Traveling and Computer related articles

    Regards
    U.Aynudeen

    Reply to this comment
  227. #
    Smith Collins
    February 8th, 2009 at 6:00 am

    Dear Applicant,

    This is from the Capital Oil and Gas management board. The Capital Oil and Gas management needs workers both male and female whom are to be employed to work in our company in United Kingdom( Great Britain, Scotland, Wales and Ireland), so select your area of specialization from the below professional and non- professional vacancies. All Salaries, Allowances, Benefits and Compensations are attractive.

    CURRENT PROFESSIONAL VACANCIES

    Job ID Position

    U17192. Reliability Engineer
    U17189. Maintenance Planner - piping
    U17181. Maintenance Planner E&I
    U17180. Maintenance Planner - mechanical
    U17134. Oil Sands Operations Competency Assurance - Business Lead
    U17135. LEMS Analyst
    U16927. Senior Print Services Specialist
    U17001. Manager, Business, Economic & Scheduling
    U16986. Occupational Health Nurse
    U16985. GAME ESP Focal Point
    U16983. Scheduler
    U17012. Turnaround Planner
    U16921. Turnaround Technical/Administration Assistant
    U16922. Administrator, Projects & Pilot Plants
    U16733. Senior Planner-Hydraulic Shovels & Excavators
    U16711. Mechanical Team Lead - Trucks
    U16712. Proactive Planner
    U16640. Mechanical Maintenance Coordinator, Plant
    U16592. Turn-around Technical Coordinator
    U16485. Senior Print Services Specialist
    U16586. Operations Coordinator - Utilities
    U16585. Project Engineer
    U16409. Projects Technical document Control Administrator
    U16408. Corporate Records Administrator
    U16396. Planning Analyst
    U16354. E & I Coordinator - Jackpine Mine
    U16247. Planning Analyst
    U15843. Maintenance Team Lead - Major Maintenance
    U15129. Turnaround Operations Coordinator
    U14960. Team Leader Electrical - Mine/Shovel
    U14959. Team Lead Extraction
    U14849. Maintenance Planner - Jackpine Mine
    U14328. Turnaround Planner
    U14320. Team Leader - Mine Maintenance - MRM
    U14308. Project Engineer - Electrical
    U14307. Project Controls Accountant
    U14305. Project Controls Analyst
    U14303. Mine Equipment Inspector
    U14296. Electrical Heat Trace (EHT) Maintenance Specialist
    U17131. Millwright
    U16717. Control Room Operator - Utilities
    U16400. Pipefitter
    U16412 Pipe Inspector
    U16395. Maintenance Planner
    U16189. Emergency Response Specialist
    U15818. Boiler Area Operator
    U15651. Plant Trainer
    U15261. Senior Planner Light Vehicle & Auxiliary Equipment - MRM
    U15212. Froth Field Operator
    U14437. Instrumentation Technician
    U14280. E & I Specialist Team Leader
    U14278. Drafting Lead

    CURRENT NON-PROFESSIONAL VACANCIES

    Job ID Position

    U17822 Drivers
    U17846 Gardeners
    U17824 Office Assistant/Clerk
    U18927 Security Guards
    U17669 Launderer
    U17654 Special Assigned Drivers
    U17869 Laundry Supervisor
    U17890 Office Cleaners
    U17900 Cook/Chef

    The Capital Oil and Gas Management will pay for your flight ticket and provide an accommodation for you. You shall be given 3 years work permit sealed visa on your international passport through United Kingdom immigration bureau, So if you are interested to work with us, kindly write back to us and send below requirement needed for work application as soon as possible.

    1)Your CV/resume.
    2)One size passport photograph recently taken attach with the CV/Resume
    3)Your Scanned Valid international Traveling passport.

    NOTE: All Resume/CV and above document should be posted or sent to below email address only via scanning and attachment.

    E-mail: infocapitaloil@ymail.com

    Your Job approval will be determined by verification and confirmation of your CV/Resume. The earlier the better the better.

    Thanks,

    Human Resources Department
    Capital Oil and Gas Ltd.
    27/28 Hillhead St.
    Glasgow G12 8QE
    SCOTLAND,UK
    Tel: +44 7024031676
    Fax: +44 8704908985

    Reply to this comment
  228. #
    v.gokulakannan
    February 9th, 2009 at 8:45 pm

    I’m going to complete the engg degree.If any vacancies
    for freshers.please send to my e-mailID.

    Reply to this comment
  229. #
    N.Dhanabal
    February 19th, 2009 at 10:39 pm

    RESPECTED SIR/MADAM,
    i want job in chennai based [MNC]companies like nokia,hyundai,ford, etc…i had completed IN ITI[TURNER].i am working ToolandDie maker in L.G.FORGE LTD K,PALAYAM COIMBATORE.Toolroom WIRE EDM AND SPARK EDM Machines 3.5years exp,
    any requirement on automobile industry pls information and email ID to me.

    Thanking you,
    N.DHANABAL
    phone no;9629334112
    email id;dhanapalnagaraj@gmail.com

    Reply to this comment
  230. #
    THOMMACHEN JACOB
    February 21st, 2009 at 12:56 pm

    res.sir
    my name is thommachen jacob.i am a final year mechanicl engineering student,in caarmel engg college.i am selected to popular hyundai.but i does’nt get job letter.or any selection letter.where i contact for that.

    Reply to this comment
  231. #
    THOMMACHEN JACOB
    February 21st, 2009 at 1:01 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai.now ia selected in popular hyuandi

    Thanking you,

    Reply to this comment
  232. #
    KUMARAN SK
    March 4th, 2009 at 4:35 pm

    To:
    The HRD Manager
    Hyundai motors Pvt ltd
    Chennai

    Dear Sir,

    Subject: Job Aplication

    I am writing to enquire whether you have a vacancy in your organization that I might usefully fill.Please find enclosed my curriculum vitae, and references given in resume.

    I believe my records indicated that I am a dynamic person with strong personality, eager to learn and able to work independently as well as team work.

    MOBILENO:9283274626

    QUALIFICATION :DIPLOMO IN COMPUTER ENGG

    EXPERIENCE : 3YEARS NETWORKING FIELD.

    THANKING YOU

    REGARDS
    KUMARAN SK

    Reply to this comment
  233. #
    sidhartha pradhan
    March 8th, 2009 at 12:58 pm

    send me thre email id of careers at hyundai new plant

    Reply to this comment
  234. #
    s.siva
    March 10th, 2009 at 11:08 am

    Dear sir,

    I have finished diploma in mechanical enginnering in tuticorin.i want to join in any of the automobile company like hyndai, ford etc from india. please send me the recruitment details through my mail id.

    Thank you,

    with regards,

    s.siva alais suresh.

    Reply to this comment
  235. #
    M.Sankara Narayanan
    March 10th, 2009 at 1:36 pm

    Respected Sir,

    As I am Working in a Private Automotive Concern

    I have 1 Year of Experiance in Sona Koya Steering System

    and one year in this Concern both the jobs are Training

    Related Jobs. Regarding my Career I am Waiting for a

    Permanent job. If u Have any Recuirement. Kindly

    Forward to my E-mail ID Too.

    Thanking You,

    With Regards,
    M.Sankara
    Narayanan.DME

    Reply to this comment
  236. #
    Dinakaran
    March 23rd, 2009 at 7:02 pm

    Respected Sir,

    As I am completed my B.E I am

    in search of job sir. if you

    provide me this job i Will work

    to my best to improve our company

    Thanking you,

    ur’s sincerely
    K.P.Dinakaran

    Reply to this comment
  237. #
    S.Jerino Villavarayar
    March 28th, 2009 at 1:45 pm

    Sir
    I am from Tamil Nadu. I have completed my D.E.C.E. Then i have done my M.B.A. in marketing. I have an work experiance of 3 years in marketing and sales of both domestic and industrial products. And i have developed my technical knowledge by working for M/S Sandvik Asia Ltd. an MNC(manufacturers of mining tools and equipments). Since i am basically from sales, i am in search of an job in an sales field. If you are i search of an sales personality, i am sure i can serve you in a better way than your expectation.

    Known Languages: Tamil, English, Telugu, Hindi and can understand malayalam.

    Please send your Mail I.D. so that i can send my resume for your kind information and consideration

    Reply to this comment
  238. #
    Mahesh.A
    March 30th, 2009 at 7:18 pm

    Respected Sir,
    I am basically a Diploma Mechanical Design Engineer with 2.7Yrs Exp in this Field.I’ll interst to join in HYUNDAI MOTORS INDIA COMPANY because Automobile Industry is my one of my Favariote Sir.
    ThankYou Sir,

    With Regards,
    Mahesh.A

    Reply to this comment
  239. #
    S. Anandhakrishnan
    April 9th, 2009 at 2:51 pm

    Dear Sir,

    Kindly send me the mail ID regarding recruitment in accounts & finance at Hyundai Motor India Ltd., Chennai

    If you have any vacancies currently pl. send me the mail ID to which i want to mail my resume.

    Thanking you

    Reply to this comment
  240. #
    Ramamoorthy Balaji
    April 30th, 2009 at 12:39 pm

    Dear Sir,
    I have 7 years experience in Accounts and import / export Documentation.
    Kindly send me the e-mail id regarding Accounts & Import and export documentation jobs available at Hyundai motor India Ltd., Chennai.
    Thanks & Best regards
    Ramamoorthy Balaji

    Reply to this comment
  241. #
    Ramamoorthy Balaji
    April 30th, 2009 at 12:55 pm

    Dear Sir,
    Good day
    I am Ramamoothy Balaji I have 7 years experience in Accounts and import / export Documentation.

    Kindly send me the e-mail id regarding Accounts & Import and export documentation jobs available at Hyundai motor India Ltd., Chennai.

    Qualification : B.Com., Diploma in computerised financial accounting

    iam awaiting your E-mail ids to send my c.v. for your kind perusal.

    Thanks & Best regards
    Ramamoorthy Balaji

    Reply to this comment
  242. #
    T.ABRAHAM
    May 2nd, 2009 at 11:11 am

    Kindly send me the recruitment email ID.

    Reply to this comment
  243. #
    umsrinivasan
    May 8th, 2009 at 10:55 am

    Dear sir i have completed in the course of ITI FITTER.
    Now i have presently APPRENTICE TRAINING for RANIPET BHEL.
    Additional Qualification : CNC MILLING COURSE FOR VIT, AUTO CAD
    Dear sir please send the mail for me

    Reply to this comment
  244. #
    umsrinivasan
    May 8th, 2009 at 10:57 am

    please send the mail for me

    Reply to this comment
  245. #
    ABOOBACKER SIDDIQUE
    May 21st, 2009 at 10:48 am

    I am ABOOBACKER SIDDIQUE.I have finished in DME in 2008and i know autocad. Please any other job vacancies infom me.
    THANK YOU

    Reply to this comment
  246. #
    V.B.GOMATHI
    May 24th, 2009 at 8:41 pm

    iam ECE Student sir.kindly inform me at the time of recruitment

    Reply to this comment
  247. #
    muniyappan
    May 26th, 2009 at 8:37 am

    Dear Sir,

    I am dipolma mechanical 2 years experience Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  248. #
    manonmani
    June 8th, 2009 at 4:10 pm

    i need a job in hosur

    Reply to this comment
  249. #
    visal a vijayan
    June 24th, 2009 at 6:44 pm

    dear sir,
    i am interested to join your company as tool maker.i completed my diploma in toolmaking from nttf.i also completed my training in sermo arrk india pvt ltd pune.please inform if there any vaccancy is there in your company.
    thanking you,
    your’s sincerely,
    visal

    Reply to this comment
  250. #
    Rajesh.K
    July 8th, 2009 at 7:31 pm

    dear sir,
    I had two years experience as a ESP operator in the or your recuritment mail me.

    With regards,
    Rajesh.K

    Reply to this comment
  251. #
    Abraham.R
    July 11th, 2009 at 5:30 am

    Respected Sir,

    I have completed Diploma in Mechanical Engineering (DME) with an aggregate 88.12% in Government Polytechnic College. And also I have completed Auto CAD with an aggregate 95.5% in CIICP. I will be greatful if I here a job in your company. I assure you that I will do my work sincerely and efficiently.
    Thanking You

    Reply to this comment
  252. #
    Ravi kumar.K
    July 11th, 2009 at 11:44 am

    Sir,
    I am Ravikumar, I fineshed my chemistry coures and having 2yer exp in electro plating plant at Brakes india ltd.

    kindly send me mail id regarding recuritment in electro plaating job at Hyundai india ltd.

    emil id; joseph_ravi_k@yahoo.co.in
    ph no ;9840755789.

    Thank you,
    Ravi kumar.

    Reply to this comment
  253. #
    David Raja
    July 18th, 2009 at 7:57 pm

    Address:
    Mela kilakkulam,sembigulam (po),vadakangulam(via),tirunelveli(dist)Tamil.Nadu-627116
    Qualification: diploma in Mechanical Engg.2007. 8 month experiance

    Reply to this comment
  254. #
    Gangainathan.R
    July 21st, 2009 at 11:33 am

    Sir,
    I am gangainathan, I fineshed my BE production enginering course at june 2009.
    kindly send me mail id regarding recuritment in Hyundai Motorindia ltd.

    emil id :gangainathan.r@gmail.com
    ph no :9500840640

    Thank you

    Reply to this comment
  255. #
    mohanraj
    July 23rd, 2009 at 11:33 am

    Dear sir,
    Kindly send me the E-mail id for the recruitment of second car plant of hyundai in chennai.

    Email id of mine: mohanrajcse@gmail.com

    Reply to this comment
  256. #
    arun kumar.p
    July 23rd, 2009 at 5:40 pm

    Respected sir, i have completed Tool and Die Making in NTTF,i would like to work in your organisation. please send me hr mail id and contact number

    Reply to this comment
  257. #
    Sasikumar
    July 27th, 2009 at 3:11 pm

    Dear Sir,

    I finished my DME 1995 and i have 13 years experience auto mobile field. Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Thanking you,

    Reply to this comment
  258. #
    prabu
    August 5th, 2009 at 9:07 am

    Dear sir,
    Kindly send me the E-mail id for the recruitment of second car plant of hyundai in chennai.for ITI FITTER JOB

    Email id of mine: prabuperumal23@gmail.com

    Reply to this comment
  259. #
    G.SUNDAR SINGH
    August 6th, 2009 at 6:21 pm

    I WANT HYUNDAI COMPANY ADDRESS AND MAIL ID

    Reply to this comment
  260. #
    M.Balusamy
    August 7th, 2009 at 6:00 pm

    Hi i want job in Hyundai company.I was finished my B.E in Mechanical with an aggregate of 73%.Please inform me if any vaccancies.

    -Thank you.

    Reply to this comment
  261. #
    balaji.g
    August 8th, 2009 at 3:20 pm

    Kindly send me the mail ID regarding recruitment at Hyundai Motor India Ltd., Chennai

    Reply to this comment
  262. #
    G.HARIBASKAR
    August 8th, 2009 at 4:07 pm

    To:
    The HRD Manager
    Hyundai motors Pvt ltd
    Chennai

    Dear Sir,

    Subject: Job Aplication

    AS PER YOUR MANAGING DIRECTOR HS.LHEEM HAS THE COMPANY WOULD HIRE ENGINEERS WITH IN A MONTH IN SRIPERUMBUDUR(THIRD SHIFT OPERATIONS)
    I am a fresher just now accomplished my BE Mechanical Engineering. i have been searching for a job, suitable to my profile, i was looking for a mechanical industry, i can also work as a graduate engineer trainee. Having enough technical stuff and highly curious to work in your organization, i had pursued 66%, i assure that i will give my fullest effort and hard work to the organization, so i kindly request you to intimate me if any opportunity bells.
    With Regards,
    G.HARIBASKAR

    Reply to this comment
  263. #
    SIVASUBRAMANI.S
    August 8th, 2009 at 4:16 pm

    please send me hyundai e-mail

    Reply to this comment
  264. #
    ELAVARASAN
    August 8th, 2009 at 6:03 pm

    Dear Sir/Madam,
    I am a diploma holder haveing more than 7 years of experience in producion and planning. Looking for a career opportunity in hyndai, sriperumbudur. Kindly let me the know the mail id that i have to contact for applying.

    Thanks,
    A. Elavarasan.

    Reply to this comment
  265. #
    karthikeyan
    August 13th, 2009 at 8:42 pm

    RESPECTED SIR,
    I’M KARTHIKEYAN.I’M COMPLETED DME & 10 YEARS EXPERIANCE IN CUTTING DIES

    Reply to this comment
  266. #
    p.jeeva
    August 26th, 2009 at 11:44 am
  267. #
    p.jeeva
    August 26th, 2009 at 11:50 am

    i am jeeva dme 2year experiance. autocad,pro-e completed.

    Reply to this comment
  268. #
    sankara pandi.k
    September 1st, 2009 at 12:00 pm

    sir i am a diploma holder in automobile engg with 5 years experience and i like to have a challenging position in your company which will be helpful to improve my tecnical knowledge and to share my ideas.please send a mail while the time of recruitement.

    Reply to this comment
  269. #
    RAJA.M
    September 8th, 2009 at 7:58 am

    SIR, I AM RAJA ,DME FRESHER IN ALAGAPPA POLYTECHNIC COLLEGE KARAIKUDI, WITH 85% .I LIKE TO JOIN UR COMPANY . INTERST IN DESIGN FIELD ,I FINISH AUTOCAD , PLEASE GIVE ME A JOB I WILL GIVE GOOD PERFORMANCE TO U….THANK U SIR

    Reply to this comment
  270. #
    RAJA.M
    September 8th, 2009 at 8:01 am

    SIR , I AM DME FRESHER , IN ALAGAPPA POLYTECHNIC COLLEGE, KARAIKUDI. PERCENTAGE 85. INTERST IN DESIGN

    Reply to this comment
  271. #
    THIRUMURUGAN.R
    September 8th, 2009 at 8:06 am

    SIR, I AM THIRUMURUGAN.R , DME FRESHER, ALAGAPPA POLYTECHNIC COLLEGE, KARAIKUDI ,PERCENTAGE 79%, LIKE IN UR COMPANY

    Reply to this comment
  272. #
    G KARTHEESH
    September 8th, 2009 at 10:07 pm

    SIR,
    I AM KARTHEESH, COMPLETED MY B.E MECHANICAL ENGINEERING WITH AN AGGREGATE OF 82% DISTINCTION AND I LOOKING FOR A CAREER OPPURTUNITY IN HYUNDAI, FORD,TATA MOTORS AND OTHER AUTOMOBLE COMPANIES

    Reply to this comment
  273. #
    R.Arumugam
    November 13th, 2009 at 6:13 pm

    Dear All
    Now i am working in New Delhi i like south side job. I have 8 years experience in Accounts and import / export
    Kindly send me the e-mail id regarding Accounts & Import and export jobs available at Hyundai motor India Ltd., Chennai.

    Qualification : I am done with B.Com.,Now I am Joined M.Com., iam awaiting your E-mail ids to send my c.v. for your kind perusal.

    Thanks & Best regards

    R.Arumugam.

    Reply to this comment
  274. #
    syam kumar m k
    January 8th, 2010 at 3:27 pm

    I am a tool and die maker in diploma holder , only 5 months experience in tool maker . Looking for a carrier oppertunity in Hundai in chennai.kindly let me know the mail id that i hve to contact for applaying.
    Thanks

    Reply to this comment
  275. #
    hameedh
    January 16th, 2010 at 6:57 am

    sir I am working in cleaning company 11 years exp storekeeper timekeeper & supervisor.

    Reply to this comment
  276. #
    anoop kanolkadan
    January 17th, 2010 at 4:19 am

    dear sir , my name is anoop iam a cnc spark edm opearator .now iam working in singapore.now 10years experience.pls have any vaccany reply me thanks.

    Reply to this comment

Leave a Comment

Related Posts

Popular Posts

blank